What's going on in your shop?
- Thread starter Justin Presson
- Start date
I have been working on grinder designs for the last couple months. Here is the disc grinder stand I just finished up.
horizontal or vertical with an adjust able tool rest.
usaknifemaker.com
EDITED TO ADD: The intro price ends at 20 sold which should happen this afternoon. We will then put regular pricing in place at $195.
horizontal or vertical with an adjust able tool rest.
Knife Dogs Disc Grinder Stand - Motor Disc and VFD Not Included
Disc, Motor and VFD are NOT INCLUDED with the stand. OPTIONS 9" Aluminum Disc for Disc Grinder - FLAT FACED DISC shipping weight: 4lbs CNC machined from a solid billet of aircraft Aluminum 6061-T6. 5/8" bore with a 3/16 keyway and set screw for standard motor shafts Accepts a standard 9"...
usaknifemaker.com
EDITED TO ADD: The intro price ends at 20 sold which should happen this afternoon. We will then put regular pricing in place at $195.
Last edited:
and here is the 2x72” belt grinder we are now making and selling.
here is the kit you can weld
usaknifemaker.com
Or we can weld it and paint it too.
usaknifemaker.com
we are still working on filling in more detail on the listings so more to come
now I can get back to knife making.
here is the kit you can weld
U-WELD-GRINDER - Grinders and Sanders Plans Parts Complete - SHOP CATEGORIES
Knife Making Supplies - Best prices, selection and service. Visit us Today!
usaknifemaker.com
Or we can weld it and paint it too.
KnifeDogs 2x72 Grinder - Grinders and Sanders Plans Parts Complete - SHOP CATEGORIES
Knife Making Supplies - Best prices, selection and service. Visit us Today! test
usaknifemaker.com
we are still working on filling in more detail on the listings so more to come
now I can get back to knife making.
Daniel Macina
Well-Known Member
I’m not dead here’s a little WIP from a few that are getting finished up. 
mike miller
KNIFE MAKER
Sean Jones
Well-Known Member
Managed to get a little bit of time in the shop today. Firstly I ordered some AAA Quench Oil which arrived just today.
Now I either need a container for it, or figure out how to get rid of five gallons of Canola Oil and use the container I have for that.
Presumably if I use the can that currently holds the Canola I'll need to clean it quite well to avoid contamination.
I also worked a bit on some scales for a kitchen knife. I had some left over Kirinite and also some black G10. I'll think this will look good with Graphite pins.
Now I either need a container for it, or figure out how to get rid of five gallons of Canola Oil and use the container I have for that.
Presumably if I use the can that currently holds the Canola I'll need to clean it quite well to avoid contamination.
I also worked a bit on some scales for a kitchen knife. I had some left over Kirinite and also some black G10. I'll think this will look good with Graphite pins.
Heikki
KNIFE MAKER
If that's a metal can, any reason you couldn't use it as is? Maybe build a wooden cradle for it to make moving it easier.
chrisstaniar
Well-Known Member
Still "grinding" away at this order. There are actually 7 in this order but one is still in the drying rack. They are all starting to look the same!
Sean Jones
Well-Known Member
The top is welded on except for a small opening to pour with. I'd have to cut the top. Not sure how that would go. I may just get another ammo can like the one I have for Canola.
Bruce McLeish
Well-Known Member
Neat handle design. Me likee.
Randy Lucius
Well-Known Member
Any reason you went with AAA instead of Parks 50? Just curious.
I been thinking about that does it work well?how thick is the spine?
