Search results

Are you cutting just handle materials or do you need it to cut steel?

You need a pair of snap ring pliers.

DeMo, do you use Fiebing's Antique finish on your tooled areas? The stamping stands out great.

I'd like to be in this time.

well done sir!

Here's what helped with the fly problem in my shop: https://www.amazon.com/BUG-A-SALT-3-0-Black-Fly-Edition/dp/B07RJZNY5C/ref=sr_1_1?crid=2BVKLIGQTUI60&dchild=1&keywords=bug-a-salt+3.0&qid=1595819389&sprefix=bug-a-salt%2Caps%2C152&sr=8-1 Its fun to shoot but even better once the grandkids got...

I had to check the date to see if it was April 1

Which ceramic belts do you use in the grits above 120? Where do you order them from?

I haven't tried that Mark, but with pins that have an asymmetrical design with a "right" and a "left" I have cut the pin in half, sanded the cut ends smooth at 90 degrees, and inserted them from opposite sides. I did a knife using the image of Texas pin this way. One side of the pin appears...

Sean, contact this gentleman, way4ep@gmail.com He is on Instagram as custommosaicpins Alexey is located in Russia. His pins are outstanding and his prices are quite reasonable. I have ordered from him four times, and there is about a 2 month wait to receive your pins. He can work from a...

looks really good!

Last year I had an abrasive cutoff wheel come apart on me. I was lucky and didn't get hurt, but it was pretty impressive. After that I switched to the Lenox Metalmax wheels. They are more expensive but they last a long time and I think they are safer. They do cut somewhat slower than the...

I don't have a KMG, but the basic work table on my TW-90 has the same problem if I'm understanding you, Scott. The pivot under the table hits the platen or wheel if you tilt the table too far up. You can make yourself a larger work rest and clamp it to the basic rest but move it up farther. This...

mine are 1 1/2" thick, 8" x 14" I bought four of them on ebay

I always liked the one that Von Gruff had in his sig line: "The ability to do comes with doing"

You know they don't let you put it on the internet if it isn't true....

Thank you for doing this Dennis. I appreciate the basic step by step approach.

Yes, I sand the concave side on my disc grinder.

You basically have to take their word for the product so you should deal with established suppliers who have good reputations. I'd be careful about buying a blade off of ebay, especially if it comes from Pakistan or is super cheap. Watch out for anything that seems too cheap. Good damascus is...