What's going on in your shop?

Working on my first slip joint. First time using CPM 154.

IMG_20160320_010148_zps4qej108d.jpg
 
Finally finished my USAknifemaker liner lock template knife. And thanks to Frank Niro, my next liner lock will be 100 times better. Awesome advice from that veteran.
I like the knife I made, but there are some very obvious flaws that I will know how to avoid next time. Mainly, I took off too much material on my liners early on and then when I was fitting the scale material I ran out of some needed room. Learn as you go!

O1 tool steel blade.
USAknifemaker thumb shredder
.080 titanium lock side
.090 stainless steel for the other scale.
Peel ply camo g10 scales
Deep ride pocket clip, which I love and will be buying more.

f4b1469f04a74fdf08635681813b994c.jpg
4b03bcdb04ef01c7ba3c87762d99e091.jpg
0cc54d6ffcac4ad9bb448e1a7d4b5bbc.jpg
ba8f18e04adf3c80105c59c86f25a35d.jpg
f619d78e85368071f161078b69eb1271.jpg
0750c5fe4e6c4de20bfe95f8a9663e11.jpg
bd104791f6bbe87ff62848d48ebe3da0.jpg
c6c760e46633a9de49059f85db656a56.jpg
c08a695f7751dea4b503666b1476cb64.jpg


Sent from my XT1565 using Tapatalk
 
Last edited:
Thanks DanielThe bottom three are the latest ones am thinking I am getting the hang of this . Lol
This is the stack that is headed to meridian blades.

I like the pair you have shared. Is the stag one a bull nose? The picture looks like it is.
 
Last edited:
More of the AEB-L bug has bitten me. 1 skinner 3 edc are about to be sent to ht this week.
Yes I know they are not that curvy. Was asked to make 2 edc tools for my neighbors and the 3rd I may try an sell if it turns out clean and proper to put my name on for a tool, not a cheap ugly sharp thing. Lol
5d8866e5ef7d50cf1c9750d9cce1fb52.jpg
 
Last edited:
I've been busy busy busy! I should probably update some of my folder threads....I seem to go SO darn slow though! Takes forever to figure this out....and then you figure it out and think"why was that so difficult?!!" anyway I'm learning so I'm happy! I think I'm starting to understand the slip joint relationships and how they work much better! I'm hooked! the frame lock isn't to bad either.....


But did get some time for fun
26170568711_7e9e92d136_b.jpg



26170568741_b8970b52fe_b.jpg



25634230383_ef2dbe3b5e_b.jpg



25634230403_b55cc5ec7a_b.jpg



25634230433_81257eba4e_b.jpg



26170634181_9247a07804_b.jpg
 
Looking good Daniel!!

I have not worked on much but decided to start this beast yesterday. I got it rough profiled, this thing is massive.
ff61e2421c29c5fb4b88b44fc629844e.jpg

b175af155351a962fe5fb52d90f3829b.jpg
 
Hell of a cleaver there Justin!
I too finally got something done out in the shop.
Here are the first 2 completed knives for 2016.
AEB-L and Denim Mycarta
wKDOXJs.jpg

a9IYVY6.jpg

and here are a couple 1911 holsters I did about a month ago
e87uIfJ.jpg

uNzP5jJ.jpg


Thanks for looking!
Chris
 
Back
Top