Press Build

[bladegrinder]

Hmmm….well that clears thing up, just kidding, I got lost at your second sentence ha Ha.

 

[KenH]

Shucks, I see I forgot to include the link in my post about calculation press tons:

Hydraulic Cylinder Calculator

www.baumhydraulics.com

 

[ArmyDoc]

What a great thread. Thanks for all the details you posted. BTW, what size are you cross members at the top, bottom and the moving portion?

 

[KenH]

Not sure what what was used on the press of this thread, but it looks like what Coal Iron used on their 9 ton press (they sell it as 12 ton). I just measured my Coal Iron press and it's 1"X3" bar, length as required.

 

[Gliden07]

What a great thread. Thanks for all the details you posted. BTW, what size are you cross members at the top, bottom and the moving portion?

I used 1x4 top and Bottom and 1x3 in the middle. I was using drops and shorts for steel and that's what they had. Its a bit taller than the Coal Iron because of the 1x4 and the 1/8" plate.