Morland KITH 2020

Serious question: Has anyone else started a back-up blade?? To be honest, I have. Anyone else??

965-A8-DB9-457-C-4-CD4-86-F5-682-E7617-AF7-E.jpg
I have...
 
I went back and sanded to 400 grit. Re-etched. Right out of the etch.

EC9-A3-E39-3-EAC-4-F84-9614-8-A547916-D288.jpg


Hit it with some steel wool.

60-EB385-F-2347-4286-A4-D4-C0571-D5573-D7.jpg


And a bit of polish.

33-E50-E2-C-E370-4963-B425-3-CA8-BD4-F3308.jpg


I still need to get the handle figured out. This will not be the final but the hamon is showing up quite nicely.

Handle, handle, handle??? Hmmmm??? Think!
 
I went back and sanded to 400 grit. Re-etched. Right out of the etch.

EC9-A3-E39-3-EAC-4-F84-9614-8-A547916-D288.jpg


Hit it with some steel wool.

60-EB385-F-2347-4286-A4-D4-C0571-D5573-D7.jpg


And a bit of polish.

33-E50-E2-C-E370-4963-B425-3-CA8-BD4-F3308.jpg


I still need to get the handle figured out. This will not be the final but the hamon is showing up quite nicely.

Handle, handle, handle??? Hmmmm??? Think!
That's looking down right elegant Dennis. I hope my hamon turns out half that good.
 
I went back and sanded to 400 grit. Re-etched. Right out of the etch.

EC9-A3-E39-3-EAC-4-F84-9614-8-A547916-D288.jpg


Hit it with some steel wool.

60-EB385-F-2347-4286-A4-D4-C0571-D5573-D7.jpg


And a bit of polish.

33-E50-E2-C-E370-4963-B425-3-CA8-BD4-F3308.jpg


I still need to get the handle figured out. This will not be the final but the hamon is showing up quite nicely.

Handle, handle, handle??? Hmmmm??? Think!
That looks awesome what is the steel?
 
Back
Top