Ball peen to spike hawk

jkf96a

Well-Known Member
tarted from a ball peen about 16 oz, USA stamped. Forgot that my phone was plugged in, but I got a few pics later in the process.

Here it is after some of the Blade was beginning to be forged out, right before I started drifting the eye.
74ee66506085dae5a412283110164dc4.png



A bit more forging...
8090d5a3aa4879790c1b69ec00911017.jpg


Forged to shape all but the spike end. Time for a little profile cleanup on the grinder.
825308611011130d3ff6d2e56cfe513f.jpg


Drifted the eye out larger to fit a regular hammer handle.
81f2d0be6cbc401cd0d2a956b09cb8e6.jpg


Got it close to finished. After this I normalized in the oven and then did a bit of finish grinding. May heat treat tomorrow.
43671f5d798c8dcb3900f7a64918c811.jpg
 
Friend of mine made a replica Tomahawk/Pipe for a friend of his out of a ballpien. Very cool!
 
Last edited:
Wow, those Willis hawks sure are nice. I've got 10 more ball peen heads at least, maybe 15. It'll be a bit before I get to them, but I definitely have more planned in the future.
 
Jason this is one the ones Stuart Willis forged from a ball peen hammer. I spoke to him several times and again not long before he passed. He used the 28oz hammers and seemed quite subdued about the fact I was interested in his work. I don't think he realized I thought I was seeing a rock star at work!! He was open to all questions (and I had many) which he always answered fully! His work is what always inspired me when it comes to hawks! I was a member of another forum (traditional muzzleloader forum) that Sturat was a member of and was shocked when I learned he had passed!

Stuart Willis 2012.jpg
 
Back
Top