Mark Barone
Well-Known Member
Ok this isn't one of those "great attempt" type posts. I mucked it up. This is my first sheath. At first the sheath was really bad, then I adjusted a few things and made it worse. I thought it looked pretty at first, nice tight shape, I pulled the knife out and when I put it back in , the knife wouldn't come out. I had to do some surgery and remove some of the opening thinking that would help. Then I put it back on the oven and well enough said. Is anybody talented enough to draw around my knife the shape of the sheath might be. Then I thought maybe my grommets were too close to the blade. They were about 1/4 inch away all the way around. Any tips will help. I am pretty sure that close up picture section is the culprit.View attachment 67591View attachment 67591
Attachments
Last edited: