Travis Fry
Well-Known Member
As many of you have likely observed, It has been a long time since I last posted a knife. Several things have intervened to assure that I stayed out of the shop. First was a CPA exam, which I thankfully passed after several months of study. Unbeknownst to me, while I studied the honey-do list grew alarmingly long, which in due time occupied several more months. In between I started to learn to draw, and found that I was quite good at it. I made an effort to seek commissions, and drew some portraits that turned out quite well. All of this time I was working full time, and trying to be a good husband and father. Finally, I got a new shop dog, a vizsla pup named Titus. Soon my last two exams will rob me of what free time I have left, until they are done in July. In the meantime, here is one I fit into the spaces and completed.
This is one of my Smithwick models with green canvas micarta, stainless pins and thong hole tube, and a blade of 1/8 inch 1080 from Kelly Cupples.
OAL: 7.25 inches
Blade: 3 inches
This is one of my Smithwick models with green canvas micarta, stainless pins and thong hole tube, and a blade of 1/8 inch 1080 from Kelly Cupples.
OAL: 7.25 inches
Blade: 3 inches
Last edited: