First knife I posted on this forum. Let’s see yours.

[opaul]

First Knife

My first knife off of my 2x72 grinder. I've got lots to learn, but I'm retired so that shouldn't be a problem! I'm also learning how to make leather sheaths. The blade is from an old circular saw, thus the pitting along the spine. I decided to leave that in because I like the look...

knifedogs.com

 

[Austin Thrasher]

Hi all.

I am a part time maker. I’ve done a few small and local shows just trying to get my name out there. I am a machinist by trade and currently work in a die shop repairing and making stamping dies. My knives are starting to look halfway decent and I am constantly striving to make each blade just a...

knifedogs.com

My first knives I posted here were in my introduction thread.

 

[Gliden07]

This was my first one. Just found it. 01 x 1/8" Micarta scales SS pins, HF epoxy. Shaped the whole blade with files! Took forever!!

 

[Ty Adams]

Like opaul I started a thread about my start in knife making.

Adventures in Knife Making

Hi all, After giving it a lot of thought I decided to keep track of my adventure into knife making. All comments are welcome good and bad. Let me start off by saying that about 15 years ago when money was tight I made a few kit knifes as gifts for family and friends. With very few tools and...

knifedogs.com

 

[Justin W.]

I believe this is the first one that I posted on this forum.