drill chart for downloading and printing

[BossDog]

Here is a drill and tap chart I made some time ago. I have copies hanging every where...

grab it and print it and hang it..

 

[Tim Musselman]

Tracy thanks I can't tell you how many time I'm looking up this information it's great to have it all in one place.

Tim

 

[Jeff Pearce]

Thanks Tracy I printed a few of them...

 

[macfly]

Thanks Tracy just what i was looking for..

Mike

 

[CDHumiston]

Thanks Tracy, this is a very informative and much needed chart for me!

 

[calharkins]

Thanks Tracy! I can use that.

 

[Brad Anderson]

Thanks Tracy!

 

[Denny Eller]

Thanks Boss

 

[Big Smitty]

Thanks Tracy! I am going to print and laminate a couple of these!

 

[Fletch Helical]

Thank you!

This would be an awesome thing to blow up and make one of those hard laminated desk blotter type things out of to leave right on a bench. Feel free to take that one and run with it Tracy should you want to sell them .

 

[Troop]

Thanks, Trace. Sure going to come in handy!

 

[bjohnson]

This is great. I was looking for something like this over the weekend. Thanks

 

[DrewBoyer]

just in case you don't have a drill chart handy, to find out the drill size for your tap, just subtract the pitch of the thread from the od of the tap.

Ex. for 3/8-16

pitch formula - 1/ threads per inch ex. 1/16 = 0.0625

drill size formula - .375 - .0625 = .3125 which is 5/16

hope this helps somebody


Drew

 

[timekeeper]

Thanks for the guide, always have to come back in the house and get on the computer!

 

[KB1SYV]

Thank You Mr. BossDog Tracy Forum Guy!!!2thumbs2thumbs2thumbs

 

[BossDog]

another reference chart:
this one is has the "standard" size ranges for button head screws..

 

[BossDog]

bump - you will want this chart if you don't have something like it now...

 

[Kevin1050]

Printed a few. thanks!

 

[12345678910]

Thank you!

This would be an awesome thing to blow up and make one of those hard laminated desk blotter type things out of to leave right on a bench. Feel free to take that one and run with it Tracy should you want to sell them .

If you're in the US, you can sign up on the Starrett website and get a wall chart plus the little cards free.

Plus there are people selling those free charts on Ebay.

 

[KellysCustomKnives]

Thank you......