Search results

I would give it a try. i need a little information handle ?, hidden tang? forged to shape only ? or a completed cleaned up after forging?

this one was taken from a lot of different knifes i have seen. it feels good in the hand. this was the 3rd peace of Damascus i have made I think i should have done another fold and had 288 layers. next time. the cherry was a crotch burl that i had drying for 10 years cut planks with the chain...

Here is one I just finished Black cherry handle, nickle silver guard and rap. Blade is made from 1084 ,1095 and 15n20 let me know what you think. It will be going into leather tomorrow.over all 15.5 blade is 5.5 , 3/16 blade at the nickle just under 1/4

price reduced to $650.00 shipping and ins included

This is a P.S. cable (pre stressed cable) this is the cable that is put into the concrete for bridges. This was forge welder and folded then forged to shape. the tang was drawn out to be rapped around the handle. The handle is made from mule deer horn. [ATTACH=CONFIG]37218

hello every one This is my first time on listing a knife for sale. the pictures are not the best I hope they are show the knife off . The knife is a San Francisco style the blade is Damascus twist blade is 6.25 inc long, 1. 1/8 wide (sharpened ) the handle is nickle silver rap, whit...

Large sub-hilt with 304 stainless and curly maple handle. Damascus blade.

what I did was the throat was made a little larger to allow for felt to be installed at the top that seemed to do the trick.

here is a knife I gust finished. This is a San Francisco style. Handle is mother of pear and Damascus and nickle silver. The blade is Damascus and is 6.5 " long the over all is 10.75 "

Curly maple handle 304 ss guard, 8" blade with file work. tooled leather sheath.

here are pics of two knives I have made. The Damascus was made in a canister with powdered steel with a thimble of ash from his cremation. This was made with the help of Indian George and Gary Rua.

yes it is , I love the handle. and the curly maple is always nice.

Just completed this carving set curly maple handle, nickle silver, Damascus blade 8 " long with a twisted fork let me know what you think. [ATTACH=CONFIG]17930

smokey moutain knife works steel pics here are pics of the steel that where in the center of the billet

I have taken pics of a bubble that showed up when I twisted the blade I will try to post them.

I check with SMKW and they will take back the steel unused but the one that I have found the flaws in they will not. the steel it is made with is 1095 and 302 live and learn.

buyer beware!!! I have just received two raindrop steel bars. I split the bar down the center and upon finishing the cut i checked the steel and i had a delimit! when grinding the blade you can see where the welds are not com-pleat I will be calling smoky mountain to see what they will do...