Search results

I'd say both turned out MUCH better than just "ok". Try GREAT! Now, you said "1070 with mild steel cores". I "think" I know what that means, but to be sure would you explain please.

I had to come back today to comment on your machete - I like it. The length and curves just flow. How thick is the blade? Did you put any distal taper at all? Lack of a distal taper keeps weight up at the end for good chopping. Good job - makes me want to use that pattern to make a...

Since the OP is wanting to use a stacked leather handle a full tang of 1/2" is desired. Stick, mig or Tig welding with a steel bar would be my idea of a way to do it. Perhaps after welding, heat the tang to mild red and allow to cool slowly to relieve welding stress. Since there is only a...

Mike, Perhaps opaul was able to find your item, but I looked for the item you refer to but wasn't able to find it. An item number is usually a good bit longer than 4 digits. Something like this "403565583119" You can also post a link to the item on this site, by shortening the total link to...

Thanks for the link Chris - It led me to - amazing what those cartoon folks can do with video. It's all computer generated per the Spin-tires folks. I would expect a 1832°F Red Hot Copper Ball (RHCB) to cause more action when dropped into a cup of honey. I guess that's something I could try...

AGreed, a roller mill excites me more than a power hammer - those power hammer things are LOUD!! and BIG and HEAVY!!!

I'll bet it shows up and is a pretty good unit. Looks like it's coming DHL freight and will be here in a couple weeks or so. You'll get a tracking number so you can follow it. Be sure to keep us updated on how well it works. Do you know what dies come with it? Did you confirm HP/KW of the...

Paul, you're getting good with those slipjoints. Congrats on the build.

I've ordered $400 to $500 electronic equip in the past and it arrived just fine - shipped FedEx or DHL and fast shipping. But a power hammer? Now that's a big equip. Got a link to the Power hammer on those sites? Just did a search for "forging power hammer" and didn't turn up anything like...

Here's a link to that AEB-L paper Chris mentioned, LOTS of good info there. https://knifesteelnerds.com/2019/03/04/all-about-aeb-l/ Chris, your experience with the graphite sprays are about the same as my experience. I still use the graphite spray for carbon steel, but for SS I normally use SS...

Steve, that is one impressive looking knife. With the attention to detail and finish it should command an impressive price. Congrats on work well done - true art.

Since around 45 to 50 Rc is considered good for a slipjoint backspring - or so I've been advised for several well know slipjoint makers. I'd expect about the same for a lockback spring - does that sound ok? For AEB-L or 14C28N I normally temper around 1100°F or so and don't bother with cyro...

I've been using the footswitch the last couple of days - WOW, that's what was needed. Now I consider the footswitch as part of the mister system.

Is the action still due to backspring too strong? OR, perhaps pin peened too much? Agreed, liners look a tad on the thick side - what thickness are they? Still, all in all - good job

what thickness liners are you using? For slipjoints I tend to stay in the .050" range

"the thing would lock up solid, then after a few months, less and less. " You're talking about a slipjoint? OR a linerlock?

I like the design of your slipjoint. Keep updating this thread as you progress. With your skill level and attention to detail I don't think you'll have a problem. One of my early slipjoints I gave to my brother who carries it every day in his pocket, no pouch or anything, just loose in pocket...

Your brother is putting lots more water on the belt than I am. I set the mister to have a fine mist of water blowing directly on the blade edge - the belt gets wet, but not enough for water to be wiped off. This mist is really cold and does make a difference in overheating the edge while...

Here's a link to Amazon with lots of choices in the $1K range https://www.amazon.com/s?k=ortur+olm3+lu3-20a+laser+engraver&crid=10NMX7AAM96O0&sprefix=OLM3+laser%2Caps%2C147&ref=nb_sb_ss_ts-doa-p_1_10 This is the one I have, a 10 watt and in the thread I linked above you can see some of the...

Justin, are you saying your laser budget is $5K? If so, you've got LOTS of good choices, a 50 watt fiber for one. I've got a OLM3 which is a 10 watt diode and it does pretty good. Take a look thru this thread to get some good ideas. https://knifedogs.com/threads/the-laser-thread.53963/