Stormcrow
Well-Known Member
These are a couple of bush swords I forged at the same time that are kind of linked in my mind, though they went to different customers. The top one was ordered up by a fellow on an archery forum who was directed my way by a guy who uses blades extensively, who wanted an 18" blade. The bottom one was a first for me in that the customer had no e-mail or smart phone that I could send him pictures of it before shipping it. He had based his decision to ask for a bush sword from me on an article by Joe Flowers in the final issue of the lamentably-out-of-print Tactical Knives magazine. Since it had been several years since I had made the blades for that article, I let the customer know that what he got would, of course, be a bit different and hopefully better.
tharkforged by James Helm, on Flickr
What links them in my mind is that when I had forged them out and had them laying side-by-side, I immediately saw them as Barsoomian short swords being wielded in the lower limbs of a Thark to ward off any blows that might slip through larger, longer-range weapons wielded by the top pair of arms. Very different blade shapes, but kindred spirits, if you will.
These are also a jumping-off point for me as I have been making bush swords for years now with integral socket handles. While I still feel that they make great handles if done correctly, I think that I have refined my multi-layer cord wrapping technique to the point that it is more comfortable than what I am able to do with the integral sockets. I still built them with Turk's head knots fore and aft to provide a good mechanical lock in the hand.
The longer blade has a black-over-black wrap and a thin false edge that could have a secondary bevel added to sharpen it. The customer initially wanted a 21" blade, but I felt that I could give him better balance at 18" and he let me go ahead.
thark04 by James Helm, on Flickr
We set up his Kydex sheath for baldric carry, with a double-adjustable, quick-detach shoulder sling like I use on my tomahawk sheaths.
thark05 by James Helm, on Flickr
I believe the blade may have picked up a bit of negative sori during the quench as the slight recurve seems more pronounced in the post-heat treatment photos.
thark06 by James Helm, on Flickr
The shorter bush sword has a 15 1/2" blade. The top edge is fully sharpened.
thark01 by James Helm, on Flickr
The wrap is tan over black, with a tan Kydex sheath.
thark02 by James Helm, on Flickr
I have to say that I firmly believe that the customer got a better bush sword than the one in the article that caught his attention. He was certainly happy with it. Couldn't ask for more than that.
thark03 by James Helm, on Flickr
tharkforged by James Helm, on FlickrWhat links them in my mind is that when I had forged them out and had them laying side-by-side, I immediately saw them as Barsoomian short swords being wielded in the lower limbs of a Thark to ward off any blows that might slip through larger, longer-range weapons wielded by the top pair of arms. Very different blade shapes, but kindred spirits, if you will.
These are also a jumping-off point for me as I have been making bush swords for years now with integral socket handles. While I still feel that they make great handles if done correctly, I think that I have refined my multi-layer cord wrapping technique to the point that it is more comfortable than what I am able to do with the integral sockets. I still built them with Turk's head knots fore and aft to provide a good mechanical lock in the hand.
The longer blade has a black-over-black wrap and a thin false edge that could have a secondary bevel added to sharpen it. The customer initially wanted a 21" blade, but I felt that I could give him better balance at 18" and he let me go ahead.
thark04 by James Helm, on FlickrWe set up his Kydex sheath for baldric carry, with a double-adjustable, quick-detach shoulder sling like I use on my tomahawk sheaths.
thark05 by James Helm, on FlickrI believe the blade may have picked up a bit of negative sori during the quench as the slight recurve seems more pronounced in the post-heat treatment photos.
thark06 by James Helm, on FlickrThe shorter bush sword has a 15 1/2" blade. The top edge is fully sharpened.
thark01 by James Helm, on FlickrThe wrap is tan over black, with a tan Kydex sheath.
thark02 by James Helm, on FlickrI have to say that I firmly believe that the customer got a better bush sword than the one in the article that caught his attention. He was certainly happy with it. Couldn't ask for more than that.
thark03 by James Helm, on Flickr