Bill Hubbell
KNIFE MAKER
I'm not sure if I put this in the right place. or if I should not have started a new thread.... This is really a thanks to all who have offered me insight in the last year, but it all kind of started with Smithy in December of 2014. I had only belonged to KnifeDogs for a half hour when he offered to ship free blanks of Missouri oak to whoever asked. I asked, and he sent two pairs. One, I passed on to a young guy who was making his first knife in my shop, with what help I could offer. The other pair I am just now using. They are on this knife- stock removal, from a ferrier's rasp. I think the wood is just right for it, and can't wait to see what the grain looks like when I get the handles shaped and sealed. The wood seems very tough/hard.
I should also put in a plug for the Bruce Bump file guide shown here- this is the first time I used it and it's great!
Anyway, thanks again to all you guys here. In the last year or so, I've been helped by way too many to list.
Keep on doing what you do!
Bill
I should also put in a plug for the Bruce Bump file guide shown here- this is the first time I used it and it's great!
Anyway, thanks again to all you guys here. In the last year or so, I've been helped by way too many to list.
Keep on doing what you do!
Bill
Last edited:
