ValliForge_LLC
New Member
Hey all! We are an authorized reseller of System Three epoxies. System Three is a Washington based company - all of their products are manufactured in America.
Blade Pro was created from the ground up by a Blade smith that works there. It’s got a high (165* F ) effective temperature resistance and incredibly high shear strength.
It’s a slow cure epoxy. Working time is about 45 minutes. This gives you plenty of time to work your tools without having to rush. It also makes clean up a breeze! Machinable time is 6-12 hours with a full cure in 24-48.
We carry both the 4oz and 16 oz kits. I have had my 16 oz kit open for about 2 months now. I have done over 15 knives and tons of handles and scales and use about 1/8 of my 16 oz set.
Check it out https://valliforge.com/knife-materials
4 oz is $19 + SH
16 oz is $46 + SH
Try it - you won’t regret it. Shop small business and support your fellow bladesmiths. I supplement my bladesmithing with reselling supplies and tools that I use and trust.
Blade Pro was created from the ground up by a Blade smith that works there. It’s got a high (165* F ) effective temperature resistance and incredibly high shear strength.
It’s a slow cure epoxy. Working time is about 45 minutes. This gives you plenty of time to work your tools without having to rush. It also makes clean up a breeze! Machinable time is 6-12 hours with a full cure in 24-48.
We carry both the 4oz and 16 oz kits. I have had my 16 oz kit open for about 2 months now. I have done over 15 knives and tons of handles and scales and use about 1/8 of my 16 oz set.
Check it out https://valliforge.com/knife-materials
4 oz is $19 + SH
16 oz is $46 + SH
Try it - you won’t regret it. Shop small business and support your fellow bladesmiths. I supplement my bladesmithing with reselling supplies and tools that I use and trust.
