Set up for stabilizing !

[David Roeder]

So finally I'm set up again for stabilizing. So this is a TurnTex chamber with a Harbor Freight 2.5 CFM vacuum pump. I built the tray for everything to have a place and keep it self contained. Both open, and closed view of the system.

 

[PT Doc]

Can you list quickly what's needed to make this and approx cost? Thanks

 

[David Roeder]

1"x 12"x 24" plywood $5.00
1"x2" pine 6' $2.00
1/2"x2"x3' pine $2.00
Paint $1.00

Not including time, it was a whopping $10.00 to make.