BruceM
Well-Known Member
Well, here is the second attempt at making a sheath. Added some tooling, dye, and Tan-Kote. Sandwiched a piece of 4 ounce in between to help protect the stitching. Have to put a lanyard on this little knife to make it easier to pull from the sheath. The knife is only about 4" long overall. It was a little crowded getting a belt loop on the back of this one. Thinking about making a neck sheath for this knife too. Really need to finish the knife, needs a bit more sanding and buffing. The scales are a polymer clay with brass pins.
Comments welcome
Bruce
[/IMG]
Comments welcome
Bruce