cardoso5fr
Well-Known Member
A guy whose trade me a toxified orange spreader wanted to make a gift to his small daughter. (6 years) he asked me to make a special version for her. I just bought Pink G10 and that was the occasion to use it 
I coupled the "spyderhole licensed by spyderco" with a tail in order to obtain more safety. The friction is very very strong and can be adjusted.
I did a hot flash temper, to obtain a blade not too hard, very easy to sharpen, to help the small girl to learn to sharpen her knife.
The hearth on a side of the blade is asked by the father
8,5 cm closed, 11 cm with the tail
3,5 cm high
12mm thick to the pivot, 10 mn otherwhere
XC75 steel, with differential hardening.
15 cmlong , 6,4 cm sharp, blade 3mm thick, small filework
Highness 3 cm to the edge and 2,5 cm under the pivot
100c6 tang, water hardened and flash tempering
Spyderhole licensed by spyderco even if the tail will be a better way to one hand open the knife
Colored friction folder
I coupled the "spyderhole licensed by spyderco" with a tail in order to obtain more safety. The friction is very very strong and can be adjusted.
I did a hot flash temper, to obtain a blade not too hard, very easy to sharpen, to help the small girl to learn to sharpen her knife.
The hearth on a side of the blade is asked by the father
8,5 cm closed, 11 cm with the tail
3,5 cm high
12mm thick to the pivot, 10 mn otherwhere
XC75 steel, with differential hardening.
15 cmlong , 6,4 cm sharp, blade 3mm thick, small filework
Highness 3 cm to the edge and 2,5 cm under the pivot
100c6 tang, water hardened and flash tempering
Spyderhole licensed by spyderco even if the tail will be a better way to one hand open the knife
Colored friction folder
