Neck knives

[NJStricker]

I pulled out an old pattern from a couple of years ago and tweaked it some. Here's the result. These are cut from 1/8" thick 1080 from Kelly Cupples. There's a little variation from knife to knife, but they are about 5 inches OAL with a 2 inch spearpoint blade, with a self-guard. These are flat ground with a microbevel. Artificial patina. The 2 holes are 1/4 inch, so you can leave them bare, or cord wrap, or add a lanyard. I knocked the corners off on the handle so it's comfortable in the hand.

I'm working on the sheaths now. They will get a simple neck sheath that will be flat enough to just stick in a pocket if you are heading out the door on a short trek if you don't want to wear it around your neck.

I have 3 available at $45 each shipped, throw in a couple more bucks if you want to pay with PayPal. If interested just drop me a PM.

Here are some pics. . .

The board that these are laying on is 5 1/4 decking for reference. . .

And in the hand. . .

Thanks for looking!

Nathan

 

[NJStricker]

Bump once.

Fuzz sticks, anyone? Osage doesn't make the best wood for starting a fire, but it's purdy. . .

Yep, curls carved with the necker.