mod- for inside carry holster

[franklin]

for all you packing with a inside holster you now the one that when you draw the holster comes with it sometimes. (thats bad)
The little lip on the bottom just does not grab the belt good enuf, so what i did was took a belt clip from a folder and used a 40 nf tap
and put a hole and some threads, well wha-la holster never comes out. i am going to order a clip with the 2 or 3 hole configuration so it does
not move what you guys think. (have not put the bolt on bottom yet,cuz i might turn it upside down with only one bolt to make it easier to get on and off so one sides open) Last pic is clip turned upside down i like it better easir to remove.

 

[rhinoknives]

Franklin,
That's a nice idea for a improvement.
I for one always want them to have a solid stitched belt strap because I rather just have the extra bother of undoing my belt to take off my sidearm that the bother of having to draw in a real life situation and having the holster still on the gun.:what!:

Laurence

www.rhinoknives.com

 

[backtines]

That's a pretty good idea Frank. I think it may make more sense to put that clip in upside down. You never know what situation you may be in when that gun needs to be drawn. This way , there will be no possible way the holster can come out at all when drawing your piece, no matter what. That's just my two cents. Good idea though .

 

[franklin]

thanks guys, Tines the first pic i was going to put a bolt in bottom, also you would have to take belt all the way off to remove. the 3rd pic the clip is upside down so you can slide belt out through the top,but i think you are right the upside down clip works better for me.

 

[backtines]

Yup , I'm saying if your gonna modify it you may as well do it in a way that that holster CAN'T come off. Ya never know.
Good job.