Mark Barone
Well-Known Member
This was my 3rd attempt and still a sheath needs to be made. And lots of thanks for the advice along the way. This is probably my 5th completed knife. There are blemishes and inconstancies but overall I am happy with it.
I would say the toughest part of making this knife was the part when I was making the knife.
Material: Alabama Damascus Steel .175 mm
OAL: 10 inches
Handle: Desert Ironwood, not stabilized
Lanyard: Leather
Bead: Antique Musket Ball
Damascus was brought up to 600 grit, soaked in 50/50 Ferric Chlorode and Apple Cider Vinegar 45 minutes
Acid stop with baking soda water and washed and wiped down till no black shown on Paper towel.
Then hit lightly with 1000 grit.
I would say the toughest part of making this knife was the part when I was making the knife.
Material: Alabama Damascus Steel .175 mm
OAL: 10 inches
Handle: Desert Ironwood, not stabilized
Lanyard: Leather
Bead: Antique Musket Ball
Damascus was brought up to 600 grit, soaked in 50/50 Ferric Chlorode and Apple Cider Vinegar 45 minutes
Acid stop with baking soda water and washed and wiped down till no black shown on Paper towel.
Then hit lightly with 1000 grit.