Thanks Dale, but those aren't on hand at the moment and no stores.I’ve used mineral spirits and lacquer thinner .... oh and acetone
Makes a lot of sense. That's probably what I'll do.I don’t use anything. I grind the tangs on a 60 grit belt and hit the scales on an 80 grit disc and glue them up. If fresh ground, there’s no contaminates to clean off.
don’t use anything. I grind the tangs on a 60 grit belt and hit the scales on an 80 grit disc and glue them up. If fresh ground, there’s no contaminates to clean of
I'm gonna get out of here before I get into trouble.Why?
I use it, it works well and I don’t have much in the way of safety concerns.
Can you not find any?
I reckon you could use some Everclear, take a nip here and there while prepping...
I started using denatured alcohol after the rubbing alcohol went MIA.Denatured alcohol?
I use rubbing alcohol myself...but maybe do what Gene does and if you have air in your shop give it a good blast of air?I don’t use anything. I grind the tangs on a 60 grit belt and hit the scales on an 80 grit disc and glue them up. If fresh ground, there’s no contaminates to clean off.
Well I got these glued up before Christmas day. Now I can enjoy the day tomorrow and just let these sit. Thanks for the help.Why?
I use it, it works well and I don’t have much in the way of safety concerns.
Can you not find any?
I reckon you could use some Everclear, take a nip here and there while prepping...