Help with a Dienelt & Eisennardt 50 lb power hammer (pics)

[Dan Graves]

I have this power hammer and can find no info on the internet. This monster weighs in at 3,800 lbs. The problem is I need to hook up a 5 hp motor to it that is 1725 rpm and I dont know the size of pulley for the motor to get whatever rpm this should call for. Also should I build a cage to cover the springs in case of failure (red ones)? Any info or help would be appreciated. Here are some pics.

 

[setlab]

If you haven't already ask on Iforgeiron, there is a power hammer section over there.

 

[Dan Graves]

Thanks Setlab. Will check it out.