theWeatherman
Well-Known Member
I was wondering if anyone could give me a good run down on what I should do to help dry or a time frame for drying wood when I cut it for handles?
I buy the blocks made for turning from Woodcraft and just slab it out for handles. It is about 2"x2"x12" and is sealed with wax or coated with wax.
I found that one of the knives that I made had the handle scales shrink away from the edges on the tang and I need to prevent that.
I buy the blocks made for turning from Woodcraft and just slab it out for handles. It is about 2"x2"x12" and is sealed with wax or coated with wax.
I found that one of the knives that I made had the handle scales shrink away from the edges on the tang and I need to prevent that.