BRad704
Well-Known Member
I has just about finished this one, but I have some weird discoloration around the tip and around the ricasso.
My etching method was to etch in PCB etchant from Radio Shack, then pull it out and let it hang for about 5 minutes to set, then rinse in warm water and spray with Windex, rinse again and then dry with hair dryer. After it was dry, I coated with Barricade and let that sit for an hour or so, then wiped with my Barricade-laden cloth on my gun bench.
What did I do wrong to get the discoloration?
Now for the pic i hate... Did I not get all the acid out of there and it kept etching/staining?
My etching method was to etch in PCB etchant from Radio Shack, then pull it out and let it hang for about 5 minutes to set, then rinse in warm water and spray with Windex, rinse again and then dry with hair dryer. After it was dry, I coated with Barricade and let that sit for an hour or so, then wiped with my Barricade-laden cloth on my gun bench.
What did I do wrong to get the discoloration?
Now for the pic i hate... Did I not get all the acid out of there and it kept etching/staining?