Doug Lester
Well-Known Member
This is my first knife with a guard or a handle with horn or antler. OAL is 10.5" with a 5" blade, 1/8" thick and 1 1/8" wide. The guard is wrought iron and the handle is of Asian buffalo, recon stone, and moose antler. The steel is 52100, flat ground, and austempered at 475 degrees for 1 hr then tempered at 450 for two, two hour cycles. Yet again, if you click on the verbage where the thumbnail picture should be you should see the larger picture. If you can't let me know. I've emailed Image Shack about this problem but I have heard back.
Doug Lester
Last edited: