ChuckBurrows
Well-Known Member
Since folks seemed to enjoy the last one here's another one - this was originally intended for myself but funds got short and I wound up literally selling it off my back
The bag design, size, and decoration are based on the shot bags (one of the actual names used for such bags in the literature of the times - they were NOT called possibles bags - that was/is a different item all together!) seen in the artwork of Alfred J. Miller who went to the 1837 Mtn Man Rendezvous.
The bag is 7 1/2" wide x 9 1/2" tall approximate........the body and strap are made from heavy brain tan that was not overly softened....the beadwork is typical Northern Plains style of the period - color choice and size was based on what was available per the trade lists and other documentation of the 1820-1830's era.......
The horn is an original dated 1791 and later 1825 - I added the rawhide repairs to make it usable and added the beaded strap - it's on a separate strap, but buttons to the bag strap when I want to limit swing....
The back of the bag - the thong and buffalo bone toggle slip under the waist belt and keep the bag from swinging freely, yet allows the bag and horn to be easily removed without having to remove the belt - what documentation there is for the 1820-1830's era has bags at waist height and not the real high under the arm carry - besides due to a shoulder injury the high carry just doesn't work for me..........You can also see the gusseted bottom which allows a bit more room for my big hands
Inside - lined with bed/pillow ticking, also documented to time and place - it has a small inner pouch made from leather to hold greased patches (most likely use), balls, or whatever....
Some new and old accoutrements to go along with the new bag...
Top row below the main horn - from left to right:
Cap horn for when I carry my caplock rifle, shotgun, or C & B revolvers - made it in 1973.....originally a priming horn it turned a real nice mellow yellow naturally (I've primed from my main horn for years).....
Antelope horn powder measure re-enforced with buffalo rawhide - horn is the tip from the first Wyoming goat aka pronghonr I ever took back in 1973. It tucks into a small pocket on the back of the front bag strap, but is attached to the horn in case I choose to carry the horn without the bag or with another one. You can see it tucked into the "pouch" in the second pic from the top.
"Medicine" Bottle aka what one carries his beaver scent in - a piece of red willow covered with deer rawhide
Second Row
Original Ely Bros cap box circa 1840 - I carry a couple of spare flints in it!
An original powder/shot measurer circa 1840 - I use it for my smoothbore
Bottom Row
Hand Forged turn screw I forged out of a mid-1800's rake tine
"Bag" knife - re-shaped from an original Shear Steel table knife made by Robert F. Mosley, Sheffield (circa 1850-60's? - the basic style is older though ) - the bone handle is reinforced with buffalo rawhide - this will eventually get mounted on the back of the bag with a rawhide sheath......
Hand forged fire striker from a piece of old wagon spring I found along the Oregon Trail near South Pass in 1974....
hope ya'll enjoy the look see.................
The bag design, size, and decoration are based on the shot bags (one of the actual names used for such bags in the literature of the times - they were NOT called possibles bags - that was/is a different item all together!) seen in the artwork of Alfred J. Miller who went to the 1837 Mtn Man Rendezvous.
The bag is 7 1/2" wide x 9 1/2" tall approximate........the body and strap are made from heavy brain tan that was not overly softened....the beadwork is typical Northern Plains style of the period - color choice and size was based on what was available per the trade lists and other documentation of the 1820-1830's era.......
The horn is an original dated 1791 and later 1825 - I added the rawhide repairs to make it usable and added the beaded strap - it's on a separate strap, but buttons to the bag strap when I want to limit swing....
The back of the bag - the thong and buffalo bone toggle slip under the waist belt and keep the bag from swinging freely, yet allows the bag and horn to be easily removed without having to remove the belt - what documentation there is for the 1820-1830's era has bags at waist height and not the real high under the arm carry - besides due to a shoulder injury the high carry just doesn't work for me..........You can also see the gusseted bottom which allows a bit more room for my big hands
Inside - lined with bed/pillow ticking, also documented to time and place - it has a small inner pouch made from leather to hold greased patches (most likely use), balls, or whatever....
Some new and old accoutrements to go along with the new bag...
Top row below the main horn - from left to right:
Cap horn for when I carry my caplock rifle, shotgun, or C & B revolvers - made it in 1973.....originally a priming horn it turned a real nice mellow yellow naturally (I've primed from my main horn for years).....
Antelope horn powder measure re-enforced with buffalo rawhide - horn is the tip from the first Wyoming goat aka pronghonr I ever took back in 1973. It tucks into a small pocket on the back of the front bag strap, but is attached to the horn in case I choose to carry the horn without the bag or with another one. You can see it tucked into the "pouch" in the second pic from the top.
"Medicine" Bottle aka what one carries his beaver scent in - a piece of red willow covered with deer rawhide
Second Row
Original Ely Bros cap box circa 1840 - I carry a couple of spare flints in it!
An original powder/shot measurer circa 1840 - I use it for my smoothbore
Bottom Row
Hand Forged turn screw I forged out of a mid-1800's rake tine
"Bag" knife - re-shaped from an original Shear Steel table knife made by Robert F. Mosley, Sheffield (circa 1850-60's? - the basic style is older though ) - the bone handle is reinforced with buffalo rawhide - this will eventually get mounted on the back of the bag with a rawhide sheath......
Hand forged fire striker from a piece of old wagon spring I found along the Oregon Trail near South Pass in 1974....
hope ya'll enjoy the look see.................
