And another vise for the vise

[JawJacker]

Keepin it SIMPLE.This makes 3 variations, one shelf, 2 for handles, now its back to work.I was getting frustrated with my wood 2x4 in the vise.

Like I said, "I dont claim to be a welder, but I can get to pieces of metal to stick together."

 

[Sagebrush Blades]

Looks like it work real good, I have one that I built that is very similar except I put a T handle on the bolt

 

[C Craft]

Simple is good and it definitely looks like it will work!!

 

[Rudy Joly]

Handy design ain't it.





Rudy

 

[JawJacker]

Rudy, awesome.
I may weld a handle on the bolt.

 

[BonhamBlades]

love it

 

[J. Doyle]

Looks good and solves the problem of long blades.

Now, what if you combined the ideas of your first and second models? Meaning instead of flat fins welded onto opposing sides of the square tube, you could weld one round bar to one side of the square tube. That way, instead of using it in your vise in only two positions, you could have the infinite adjustability of the round bar pinched in your vise for rotation and still have an open ended tube that would allow long blades to pass through.

Man, I'm a pain, ain't I?

 

[JawJacker]

Ok, I went full (Wheeler) on this mod, I found a small piece of black pipe, like he uses, it works nice. Now its back to work.

 

[J. Doyle]

Now we're talkin'! Nice job.