gearhartironwerks
Well-Known Member
Hi,
Here are blades just completed:
The feather damascus hunter and wandering feather chef blade are made from 1095/L6. The carbon hunter is 5160. Both hunters are approximately 8 5/8" overall with a 4 1/4" blade. Depth at the heal is 1 7/16" and thickness at the spine is 5/32-3/16".
The wandering feather chef blade is 11 1/4" oal, 6 1/4" blade and 1 3/8"h and 1/16" at the heal of the spine. It's one of the lighter and thinner blades I've made.
Comments, suggestions, criticisms welcome...I'm not so sure about the criticisms, but have at it.
Thanks for looking,
John
Here are blades just completed:
The feather damascus hunter and wandering feather chef blade are made from 1095/L6. The carbon hunter is 5160. Both hunters are approximately 8 5/8" overall with a 4 1/4" blade. Depth at the heal is 1 7/16" and thickness at the spine is 5/32-3/16".
The wandering feather chef blade is 11 1/4" oal, 6 1/4" blade and 1 3/8"h and 1/16" at the heal of the spine. It's one of the lighter and thinner blades I've made.
Comments, suggestions, criticisms welcome...I'm not so sure about the criticisms, but have at it.
Thanks for looking,
John