I have been quenching 1095 in olive oil with OK results, then I read 1095 benefits from a brine quench. So I took it to non magnetic and into the brine in less than 2 seconds. Held it in the quench for a 7 count. All 3 blades warped but not very bad. While they were above handwarm I sanded the scale and into a 450 oven for the draw. I thought about something shiny and forgot the blades so they were in the oven for 4 hours. After the temper I put one in the vise to try to bend out the warp and it snapped with minimal effort, the other 2 followed suit. So just what happened and what did I do wrong?