Search results

Thanks guys!

And the end result: 11 inch long blade, hollow parts are polished and the flats handrubbed to 1000 grit. This project has been quite a challenge.....as was taking some decent pictures..... :D I take my hat of for mr Brend and all others who do these grinds.

A good friend asked me to make him an Orbis with a blade that is based on Walter Brend's knives. Since I'm a big fan of mr Brend, I accepted the challenge. The blade is forged out of a block of O1 toolsteel, has a blade of 11 inches....here are the first pictures: My mini press...

So it took awhile but here is the rest of the pictures.... When the knife is ready to be hardened it will be stress relieved for a second time and then hardened. Here are two pictures of the finished knife with the Kydex/Leather sheath made by...

This evening I hamered the guard in the right place and angle. Next I've drawn out the tang: Positioning of the grind guide... first grinding Opening up the choil further by using a wider diameter contact wheel... Choil opened up and steel removed from the tang... check if...

Great work Erik!

Cool, I've seen the welded blank when I was visiting him (picking up my knife, see other thread). This one will be great Mark!

Knifemaker Erik Markman and I made a deal, he would build me a knife and I will build him one. Because Erik is less lazy than me, I received my knife last week. I gave it a Flat Dark Earth coating an here it is, a beautiful tactical integral! Model: Taurus 12 Blade length: 5" Steel: O1...

Today I finished a Bull Shark M. Black GunKote coating and OD green micarta grip. Steel is CruForge V this time, an excellent steel for a user in my opinion. Ingredients of the steel: C: 1.05 Cr: 0.50 V: 0.75 M: 0.75 Here are some pictures:

O man I hate filing guards, it's the reason I started making integrals

And a bit more action... Drawing the rough lines on the blank. Important for the positioning of the wings and the point. Here I used the angle grinder to cut of the point in reverse. So the angled part will become the back and the straight part the edge. Than I made two cuts which I will...

I started on an Orbis 10 and thought it would be nice to take pictures of the whole process. The Orbis 10 is an integral bowie styled user knife. This one will get a double guard, only the upper guard will be just high enough to place a lanyard hole in it. It will get a brown micarta handle and...

It's December so I decided to get myself a present! Unfortunately I had to make it myself.....;) I made an Orbis 6, Cerakote coating, stabilized Maple burl grip. Sheath I still have to make. The knife is forged out of 1 piece of 1.2510 (O1), which makes it a half integral. Steel...

the jimping is not machine cut. I use a checkering file and cut the jimping as deep as the file will go. You end up with very sharp tips which I flatten with a fine file. For me this is the only way to get it even. (still having troubles sometimes).

The orange keeps on coming back in my knives lately.... Bull Shark M, black linnen micarta grip, orange and black G10 liners, 1.2510 steel selectively hardened, graphite black CeraKote finish and last but not least a hardened pommel. Sheath will follow.

This is a slightly different Bull Shark then I normally make. It has no recurve and no coating (ok just a little on the back for rust prevention and because I have a hard time not coating these blades :D) Other than that it is the same as all others: Steel: 1.2510 selectively hardened Grip...

Saw this on de Dutch knife exhibition, man what a great knife!

For the Dutch Knife Exhibition I wanted to make a prototype of one of the Orbis family. In this case one with a double guard. The Orbis series are of half integral construction but I did not make a double guarded one before, just designed it. The end result is pretty much what I was looking for...

BladeSports NLD would like to thank Ian Rowlandson of BladeSports UK for his assistence, guidence, instruction and humour of cource. Last weekend Ian coached and observerd two of our members who are in the process of becoming instructors. At the same time 8 new members got certified this...

Great knife Erik, half integrals rock!