Search results

But i like it alot. Scales are redwood. 4" blade with very modest file work and i hammered the finger guard.. Not bad for a Resurrected Blade.thanks for looking<><

seems I am in need ofa mill. looking for a small one (benchtop) will buy or swap. I have adetonics 45acp in great cond 700.00 willing to work a deal. If swapped t for the 45 acp It will have to be done through my FFL dealer.Thanks<><

Just finished this one up. I choose Claro walnut for the handle and rasp bolsters. The bolster has mosaic pin and also the scales have 14 brass pins. Spacers are Black fiber & brass & red fiber.Blade has file work on spine and is 8" oal is 13".thanks&lt;&gt;&lt;

Just finished this one with a 4" blade with a 3.5" cutting surface and a oal of 8.25". Handle is Elk antler with a wenge spacer and Curly bubinga upfront and brass hardware and mosaic pin.The blade also has modest file work Thanks<><

THIS KNIFE WAS SUPPOSE TO GET A STANDARD PADDLE STYLE SHEATH BUT MY WIFE WANTED TO MAKE ONE UP SPECIAL FOR THIS MEMBER AND HIS KNIFE TO MATCH. SHE USED THE COPPERHEAD SKIN AS AN INLAY TO GO WITH THE AMBROSIA BURL IN THE KNIFE HANDLE PATTERN AND STAINED DEEP TO SHOW OFF THE PATTERN OF THE SNAKE...

SOMEONE ASKED ME TO MAKE THEM A KNIFE WITH COPPER BOLSTERS AND HARDWARE WITH SPALTED AMBROSIA MAPLE HANDLE. THIS IS WHAT I MADE FOR HIM. BLADE IS 3.5" WITH F ILE WORK ON SPINE.HOPE HE LIKES IT.<><

This one has a 8.5" blade and oal is 13.5" modest file work on spine with raspy bolsters and elk antler scales.I like this one and almost wanna keep it and make the guy another LOL&lt;&gt;&lt;

Sorry double post<><

These are just a lttile bigger then my norm. Just simple knives nothing fancy. thanks guys<><

Seems i am in need of a couple of pieces of 1084 steel 7"-12" long 1"upto 1.5" wide 1/8" UPTO 1/4" thick. anyone?<><

And this is what I ended up with. Blade is 3" oal is 7.25" . seen one of these style awhile back and had to try and make one. &lt;&gt;&lt;

Made from sawmill steel and some scraps of wood from some friends. The handle is wenge and toasted Elk anler.And yes I mean TOASTED!LOL&lt;&gt;&lt;

FIRST WANNA THANK EVERYONE FOR THERE PRAYERS AND GOOD WISHES. I GOT 2 HERE. FIRST ONE HAS A ZIRCOTE WITH BRASS PINS AND MOSAIC PIN. BLADE IS FROM A OLD FILE HEAT TREATED AND TEMPERED 3" OAL IS 6.25" . 2ND ONE HAS ELK ANTLER HANDLE AND IS ALSO FROM A OLD FILE HEAT TREATED AND TEMPERED 2.5" OAL...

Did a little messing around and this is the out come.The blade is 3" oal is 6.5". Copper bolsters and pins and mosaic pin lanyard hole also.Has modest file work on spine. thanks guys<><

I MESSED AROUND A LITTLE AND CAME UP WITH A DROP KNIFE. THIS IS A MINI WITH MOSAIC LANYARD HOLE AND AMBORSIA BURL HANDLE. BLADE IS JUST ABOUT 3/16" THICK AND 2" LONG OAL IS 4.75" SPACER IS EBONY AND BRASS UPFRONT. THANK YOU<><

GOT THIS HERE AND MUST SAY I LIKE. BLADE HAS MODEST FILE WORK ON SPINE. HANDLE IS ELK ANTLER WITH A MOSIAC PIN AND PURPLEHEART SPACER AND BRASS. BLADE IS 3" OASL IS 6". THINKING OF A HORIZONTAL SHEATH OR MAYBE A PADDLE SHEATH?<><

Just finshed this one today. 5" blade. The Cocobolo has a awesome grain.<><

This was a drop piece of steel from another knife I cut out.I did a freehand grind to shape and this is what I came up with. The handle is Weathered Rocky Mountian Elk antler and brass hardware. Blade is 1.75" oal is 4.75" 3/16" thick and has some modest file work on the spine. will come with a...

Well i had a guy ask for a dagger type knife.I never did one before. And so I eye balled this one. Made from a nick file and has a file bolster and stained maple handle. Blade is 5.5". I like it myself. Sorry for the crappy pic its in a deep freeze here and I am not going outside to take pics...

Finished these up today. The curly Ash is 11" oal. and I like it.The others are smaller and will make very nice EDC.<>< I also have a big skinner with rasp bolster and curly ash handle.Blade is 6.25" oal is 11" great camp knife also.&lt;&gt;&lt;