Search results

thanks for the kind words guys :) Laurence, i bought the pivot from USAknifemaker and moded them a little bit http://usaknifemaker.com/folding-knife-parts-c-30/pivot-barrel-3-16-x-1-2-l-for-folders-w-2-56-thread.html

Hallo, just finished this pair of friction folders for the up coming knife makers show in solingen. blade: 2.6mm CPM D2 handle: carbon fiber over titanium liners/dyed curly maple over stainless liners overall length: 17cm thanks for looking

i'm glad you all liked it, thanks you got me there Doug, i usualy work with a full face mask/respirator, but it was taken off for the picture :) תודה רבה מייק! i wish, i was working on a big batch of knives to sand for HT, i'm going to the knife makers show in solingen this May so i...

Hallo It's been a long time since i'v finished a knife, it sure feels good :D i always loved forged integrals specifically Gerhard Wieland's work, because i only do stock removal i couldn't make one, but thanks to a good friend and a fellow knife maker named Rudi Zirlin who made the blade...

thanks Laurence, it all sounds very reasonable, and actually it's exectly what i'v done so far in all the local shows i'v been to, it's very natural for me as i genuinely like to talk about knives, one thing i don't think i could ever do is to clean all the dirt from my hands :biggrin: thanks...

Hi, I'll be attending my first knife show abroad in May, this is a big deal for me and i'm working hard to be ready for the show, i would like to hear from your own experience preferably about this event specifically, are there any points i should put emphsis on? and also, are any of you...

hallo, i finally had all the stuff i needed to continue working on this knife. the handle matirial is a combination of carbon fiber cloth and stainless steel mesh that i made myself, ut turned out pretty cool :D the CF cloth before gluing. and after the knife is not finished...

some more work on the bolsters thanks for looking.

Hallo, i started working on my first integral (bolster), always wanted to make one :D i started with a 15mm thick D2 bar and milled 5mm on each side leaving a 5mm blade and tang, i used a friends mill, it would have taken a year if i was doing it on my sherline mill :D sorry for the...

thank you guys, i'm glad you liked it, i think this design is going to be a keeper. BTW,the koa wood is amazing, the pics don't do it justice, thanks Mark.

Hallo, just finished this one for a customer 4mm CPM D2 blade overall 23cm titanium bolster and stabilized koa wood handles. thanks for looking

just finished this new rope knife, let me know what you think overall: 19cm blade: 3mm CPM D2 acid etched handle: black G10 with etched aluminum screws ambidextrous kydex sheath

thanks guys :)

it was a nightmare! especially after HT, but it's an amazing steel IMHO

thanks Laurence, a small batch is being printed with this design, i must have the for a show next month, i'll see how the work and people's reactions, i'll take all you said into mind when i'll have some more printed.

thanks guys, i'm glad you like it :).

here is a link to the finished knives http://knifedogs.com/showthread.php?27795-CPM-D2-with-bog-oak-amboyna-burl-orange-padauk-and-canvas-micarta

but not in one knife :biggrin: just finished them, i still need to make the sheaths. over all: 24cm/9.5" blade: 4mm CPM D2 handles: stabilized 5460 years old bog oak amboyna burl olive canvas micarta orange padauk all with Ti bolsters here is a link to the WIP...

logo etching

Hello, here is my new (first) buisness card, it was designed by my brother, i just gave the general idea. tell me what you think, it will be printed in a few days (the lettering is lighter on the final design) front and back