Justin King
Well-Known Member
Just finished up this Tasker model for my stepson (1st Radio Batt., USMC) this week. He already has one of my heavy field knives but said he needs something smaller to use in the shop and for technical work. Santa is headed out a little early this year (he's usually late when delivering one of my knives:les
3-1/4" blade
7-1/2" overall
5/32" cpm3v
OD green "camo" scales
400 grit hand-rubbed and extra fine bead blast finish
Assembled with flared SS tube, West Systems G-flex epoxy, and only one or two swear words said during the mount-up (had epoxy on before I remembered to counter-sink the pin holes again!)
OD green Kydex with my own pre-tensioned "bueno clip" and a small Molle on the side
)
3-1/4" blade
7-1/2" overall
5/32" cpm3v
OD green "camo" scales
400 grit hand-rubbed and extra fine bead blast finish
Assembled with flared SS tube, West Systems G-flex epoxy, and only one or two swear words said during the mount-up (had epoxy on before I remembered to counter-sink the pin holes again!)
OD green Kydex with my own pre-tensioned "bueno clip" and a small Molle on the side
)
Last edited: