Darrin Sanders
Moderator
If it performs as described it should be great for any of the 10xx series although it may be a little fast for 5160.hmm wonder how it will do with 5160 and 1084
If it performs as described it should be great for any of the 10xx series although it may be a little fast for 5160.hmm wonder how it will do with 5160 and 1084
Lee gave me a price for 5 gal of the DT48 of 72.50 and shipping to NM of 24.00
I'm interested in this as well, I've talked to Lee myself, (I think he's so nice because he's a Texan) anyway, how are you going to judge the results? Is there anyone willing to do the Rockwell testing, maybe having one or 2 different people to do the testing would be better, at least that way they could all be judge equally, I would be willing to Ht a few baldes with it, different types and thicknesses, using Aldo's 1084, and some of his 1095, the thick 3/8" stock he has, if there is someone that would do the RC testing for mine, I'd be happy to run a few blades on it, Thanks, Rex
Thanks Larry, that's one of the missing ingredients. Ultimately I plan on comparing Parks #50, DT48 and a polymer Lee sells called PQ90. My interest in these is primarily for 1095. It would be great if I could send you a few pieces to test when I'm finished.
As far as testing in my shop, I'll quench some 1095 just like I'd do in brine and see how hard it gets. if I like the edge I get I'll do it again and again and again to see if I can get the same results multiple times.
Hey Darrin, I'll send you a gallon. PM me with your address and I'll let you know about shipping when I get the stuff.