Search results

This is a boot knife that I finished recently. The blade is 1084 & 15n20,with the guard made of 416 sst aand engraved by Dave Lark which had gold and copper inlay. The spacers are nickel silver and red spacer material and the handle is mammoth ivory with a Damascus frame between the two...

Here is another medium hunter that will be going to the Badger Show. I used O1, 1095 and 15n20 for the Damascus and arranged my steels in this billet to highlight my 15n20. Creating the ladder pattern highlighted the 15n20 right down the middle of the blade. The bolsters are 1084 & 15n20...

I just finished this medium size hunting knife that I'll have at the Badger Show in Janesville Wisconsin this weekend. The "feather" pattern isn't the traditional style but rather I think that it looks like sparks off of a grinder. I'm not sure really what I should call it. The steels I used...

I just wanted to show and share the knife that I finished this morning. It is ladder pattern Damascus (160 layers of 1084 & 15n20), "W" pattern bolsters (also of the same steel types), Amber stag carved bone (from Culpepper) scales and Mosaic pins. Both the steel and leather are my own work...

This is my first knife of 2014 finishing it on the 3rd. It is of Scagel influence in handle only. The blade is a rose bud pattern of 1084 and 15n20 steels. The guard is 416 SST, with the spacers of .040" 410 SST and black spacer material. The wood is stabilized Curly Koa and the rest is...

I think that the hardest part of posting a new thread is to come up with a good title. Anyway, I finished this Bowie this week. The blade is Damascus with a slanted ladder pattern of 1080, O-1 & 15n20 steels, is 8 3/4" long and the overall length is 13 3/4". The width is 1 1/2". The guard...

I just completed this folder and will have it with me this weekend at the Ohio Classic Knife Show in Cambridge Ohio. The blade has 5 different steels, W2, 1084, L6, 15n20 and 1095. I used the L6 because it was 5/8" thick and I thought that it would add to the contrast of the pattern. The...

I just wanted share these two folders that I just finished today. They are basically identical except for a few minor things like the scales on one are rounded while the other is not and the grind on the swages vary slightly. The Damascus is my own being 1084, 1065 and 15n20 and of a stretched...

This is the last one that I can make before the AG Russell Knife Event this weekend. It's just a little larger than a normal bird and trout but I guess that it could be called a "goose and salmon" knife but somehow I'd go with the B & T. The blade is a ladder pattern that came out of a basket...

I just finished the sheath today after completing the knife on Tuesday. The blade is a ladder pattern with 1080, 1095 & 15n20 and is 6 1/4" in length. the guards are a random pattern Damascus with wrought iron, nickel 200, A203 and 1080. The spacer is Kopal Amber and the wood is Arizona Iron...

Here's another B & T that I completed yesterday. The Damascus pattern is more coarse than I usually do but is still attractive (I think). It is 1084 and 15n20. The guard is 416 SST, spacer is M3 (Red Bronze) and the handle is canvas Micarta. Thanks for looking. Bill

This was finished last week as well as the B & T that I recently posted. The Damascus on both the guard and blade is 1095 and 15n20. The spacers are African Blackwood and stainless steel. The handle as mentioned is Fossil Walrus. Thanks for looking. Bill

Just wanted to post a B & T in feather Damascus that I just completed. The steels are 1095and 15n20. Scales are stabilized Maple burl, end grain. Pins are mosaic. This is the first knife that I completed since April 2nd from having surgery on my left hand. I just about went nuts being out...

This knife is one of a new pattern that I like to make. The blade is a two bar twist Damascus with 1080 and 15n20 steel. The scales are Sambar stag; the pin is 1//8" dia. mosiac and the lanyard hold is 304 stainless. I have a faux edge on the spine which gives me a median that is offset of...

I want to show a hunter that I just finished. The blade is 1080 and 15n20 Damascus steel in a wavy ladder pattern. The guard and pommell are 416 stainless steel. The handle is Black Ash Burl stabilzed by WSSI and dyed in gold and black. The spacers are ruby red and black G10. Thanks for...

I posted the Damascuse earlier in the folding knife forum not knowing that we had this forum. The blade is a random pattern Damaxcus with 1080 and 15n20. The handle is curly White Oak with a pink ivory wood wedge. The Plain steel razor is made of Bohler M390 steel, cyrogenic treated and has a...

I finished this sub hilt just recently and will have it at the AG Russell Knife Event this weekend. The blade is hollow ground with a "W" ladder pattern that has a very fine pattern. The guards are random pattern tri colored Mokume (which has taken on a very nice patina). The spacer is...

I wasn't sure where I should post this and figured that it folded, then this might be the right place. I finished it this past weekend and had fun making it. The Damascus is 1084 and 15n20, random pattern, with stabilized curly Oak scales with a wedge of Pink Ivory wood. I thought that I would...

Here is a liner lock that I finished earlier this year. It is 6 ¾” open and 3 3/8” closed. The blade is Bohler M390 steel. The scales are checkered Black Walnut, titanium liners with a ¼” diameter ball bearing on the pivot pin. It has a very fast and smooth action. Thanks for looking. Bill

This is my first sub hilt knife. I had some basket weave Damascus left over from the Bowie I completed and decided to make this. The blade length is 4 3/4" and overall length is 9 1/2". Fittings and pin is 416 SST, engraved by Dave Lark. (Dave said that he just had to engrave that pin!) The...