Latest activity

  • T
    tkroenlein replied to the thread Quick question..
    You guys are killin' me.
  • J. Doyle
    J. Doyle replied to the thread CA glue between spacers?.
    I agree with Bruce. Also, you can check local supply places for special CA glues. I've tried thin stuff from all the big box stores and...
  • J. Doyle
    J. Doyle reacted to Bruce Bump's post in the thread CA glue between spacers? with Like Like.
    One trick I have found is to clamp every thing together first, this way the fit is perfect. Use the super thin CA to wick into the...
  • J. Doyle
    J. Doyle replied to the thread Quick question..
    I would never even give Belello's a moments thought, especially after the whole turtle wax fiasco. Peranio's are a bit on the pricey...
  • John Wilson
    John Wilson reacted to Jon Buescher's post in the thread What's going on in your shop? with Like Like.
    New tools for me!
  • John Wilson
    John Wilson reacted to Randy Lucius's post in the thread What's going on in your shop? with Like Like.
    Got my quench plates today from Tracy. 1X4X16. Mounted in a vice and ready to go. 154-CM and 440-C from Aldo is supposed to be here...
  • Kevin Zito
    Kevin Zito replied to the thread Quick question..
    Yes! Man, thanks for the info. I double checked their website and you are 100% correct. This news could not come at a better time. I was...
  • Kevin Zito
    Kevin Zito reacted to J. Doyle's post in the thread Quick question. with Like Like.
    There are a couple ways to do distal tapers on a blade. You can grind the tapers in from ricasso to tip first, then grind your main...
  • Kevin Zito
    Kevin Zito reacted to J. Doyle's post in the thread Quick question. with Like Like.
    Ricasoli's didn't shut down ALL tampering operations.....the current heat wave and fires in that region have caused major tampering shut...
  • Kevin Zito
    Kevin Zito reacted to Guindesigns's post in the thread Quick question. with Like Like.
    Sorry voice text sucks.
  • Chris Railey
    Chris Railey reacted to J. Doyle's post in the thread Quick question. with Like Like.
    There are a couple ways to do distal tapers on a blade. You can grind the tapers in from ricasso to tip first, then grind your main...
  • Windom Armory
    Windom Armory reacted to Sean Jones's post in the thread #3 finally done. with Like Like.
    That can definitely make things awkward. You want to be paid what you are worth, but you don't want to feel like their just being...
  • J. Doyle
    J. Doyle replied to the thread Quick question..
    There are a couple ways to do distal tapers on a blade. You can grind the tapers in from ricasso to tip first, then grind your main...
  • EdCaffreyMS
    EdCaffreyMS replied to the thread Quick question..
    OH! Forgot that part! Put the distal tapers in first thing....right after you cut out the profile. It's way more work then if forged...
  • Guindesigns
    Guindesigns replied to the thread Quick question..
    Stock removal. Unfortunately I do not have the means to forge yet.
Top