Smallshop
KNIFE MAKER
So I'm in the middle of a shop "remodel" and I realized I don't really want to give up wall space to hold belts. I have 12' ceilings in here and a nice beam running through the shop....so...
the 87 cent solution. a plastic bowl from 99cent store, $4.00 box of fender washers, Bulk screws $ 1.99 a Lb. Drilled a hole in the center. Then when I get them all finished I write on a disposable plast plate the grit,etc.
...and tape it to the bowl.
plenty of room to walk under....
and easy to lift down or put up with the cheesy hook I rigged up.
No wasted space.....not fancy but definitely on budget...lol. strong enough for air hoses and extension cords so I put plenty up....
Ted
the 87 cent solution. a plastic bowl from 99cent store, $4.00 box of fender washers, Bulk screws $ 1.99 a Lb. Drilled a hole in the center. Then when I get them all finished I write on a disposable plast plate the grit,etc.
...and tape it to the bowl.
plenty of room to walk under....
and easy to lift down or put up with the cheesy hook I rigged up.
No wasted space.....not fancy but definitely on budget...lol. strong enough for air hoses and extension cords so I put plenty up....
Ted