buffing wheel

[v-6]

where did you get your buffing wheels? What kind is it and what was the cost.
around here there is no place that handles them.
It looks like ordering them is the only way I will be able to get what i should have.
thanks vern

computer smash 1

 

[DiverTexas]

I have bought my sewn buffing wheels from Texas Knifemakers supply in the past.
Did you check the bosses site?

 

[HELLGAP]

Im slowly getting away from buffing . Its just like everyone said DANGEROUS . It is by far the scariest piece of machinery in my shop. I got mine from princess auto but any automotive type hardware shop should have them in the buffer section. kellyw

 

[David Wesner]

Hey Vern cool 1

Check out Caswell http://www.caswellplating.com/buffs/index.html#compound

They have some fine quality buffs at very reasonable prices.
I've been buying my buffs and most of my compound from them for quite a few years now - good stuff 2thumbs

check-em out

 

[v-6]

Hey Vern cool 1

Check out Caswell http://www.caswellplating.com/buffs/index.html#compound

They have some fine quality buffs at very reasonable prices.
I've been buying my buffs and most of my compound from them for quite a few years now - good stuff 2thumbs

check-em out

Thanks David
It looks like a great place. I bought 3 wheels and there on there way.
I could not see where caswell is from ,do you know?

vern

 

[Kentucky]

I just bought two off ebay for $4 each..They work great..

 

[Frank Niro]

I get mine from K&G knifemakers supply. They have them in one inch thick and several diameters. AS well they are NOT spiral sewn which I do not want. They also have a terrific pploishing compound that is their own in green. It's a little more expensive, but worth it. Frank