6 bar twist Bowie

Cody Hofsommer

Well-Known Member
Hi, this is my first post here other then a intro.... But ill do it again. I've been making knives for about 2.5 years and I love it. Well here it is...
Here is my latest. 10-3/8" blade and 15-3/4" OAL. The guard and spacers are twist Damascus and the pin and the other spacer is SS. The handle is stabilized Claro Walnut. The clip is sharp and there is about 1/16" of distal taper. Thickness at the ricasso is .230". Let me know what you think.
DDF7CA3B-3B83-4F46-80A3-F1868419476E-361-0000016CD9CDE283_zpsbce416c6.jpg
18A47735-40DA-4C1A-BC41-7823BE5C7282-361-0000016CDFEBBFCD_zpsf2a90c48.jpg
94450E36-02C4-4A7C-9ECB-2C8D42A02F49-361-0000016CEF2C861C_zps8281fa4e.jpg
AA08AA6C-B4A1-487C-BDD9-9FC28EA89CFD-361-0000016D189EEC3E_zps33abacf9.jpg
B24BE62F-8E8E-4B52-ABA2-9196A9AB5A52-361-0000016D1EA1E67A_zpsfcca0f0f.jpg
D82C1175-D6CE-4B8E-8ACE-1ADF122DC17B-361-0000016D55FB2410_zps08994660.jpg

Thanks for lookin
Cody
 
Last edited:

Lagrange

Well-Known Member
That's nice! I like your makers mark too. Good job...and welcome. Looking forward to seeing more from you!
 
Top