custom folder

This Custom flipper knife from Jim & Joyce Minnick offers beauty and usability in one knife. This knife features stabilized redwood burl handle construction with zirconium bolsters and purple anodized liners. The clip point D2 blade has been hand sanded then black oxide coated for a sturdy...

Hiroaki Ohta OFF FK series offers first quality materials and craftsmanship with out costing a lot of money. This OFF FK 5 knife has a iron wood handle and the blade is two-tone finished with satin grinds. Includes a black leather pouch. Also available in Cocobolo wood. Overall Length: 5.50"...

This beautiful trapper knife from P.H "Phil" Jacob from Wichita, Kansas. The knife features amber camel bone handles with grooved 410 stainless steel bolsters, Roman knot backsping & liners fileworks. The 2" dop point blade is made of hand rubbed satin CPM154 stainless steel. Phil has learned...

This John Kubasek custom drop point flipper is his typical design and style folder. Technically! a frame lock since the back side handle scale does not fully cover up the lock but for all intensive purposes, it's a liner lock. This design does, however, provide you with a built in over-extender...

This gorgeous gentleman's flipper knife from Ronald Cotton Hewitt with its amazing action lockup & blade seating. The knife features a hand rubbed satin finish CPM154 stainless steel blade. The titanium liner lock frame is outfitted with carbon fiber scales and hand satin titanium back spacer...

PRODUCT DESCRIPTION This custom Will Zermeno Azrael tactical flipper knife with LSCF, titanium bolster and biohazard cutout handle and stainless CPM154 blade. Polished titanium spacer pins, stonewahed pocket clip and dual thumb studs. Titanium pocket clip is mounted for blade tip up carry...

PRODUCT DESCRIPTION Hiroaki Ohta OFF FK series offers first quality materials and craftsmanship with out costing a lot of money. This OFF FK 5 knife has a cocobolo wood handle and the blade is two-tone finished with satin grinds. Includes a black leather pouch. Overall Length: 5.50" Blade...

PRODUCT DESCRIPTION Chuck Gedraitis Velociraptor flipper frame lock. 3-1/2in blade made of Al May ladder pattern stainless Damascus. The scales are orange peel tumbled titanium that has been light anodized bronze. The pocket clip is milled Zirconium right hand tip up the backspacer is solid...

PRODUCT DESCRIPTION Peter Carey 50/50 Nitro features Camo G10 handle scales. The scales are placed on a .095″ 6AL4V titanium liner. Featured in the handle is a black G10 back spacer and a titanium stonewased pocket clip. The .170″ CPM154 blade features a stonewash finish, Carey logo, and moves...

PRODUCT DESCRIPTION Marfione Custom DOC Apocalyptic Elmax Blade - (Death on Contact). 5-1/2" closed framelock. 3-3/4" Apocalyptic stonewash finish manual opening, hollow ground Elmax stainless blade with flipper. The blade features a notched area to provide extra grip. Milled black carbon fiber...

PRODUCT DESCRIPTION Overall Length: 8-1/4" Blade Length: 1-5/8" Cutting Edge: 1-1/2" Blade Material: ATS-34 Blade Grind: Flat Finish: Hand Rubbed Satin Edge Type: Plain Handle Length: 3-1/4" Handle Thickness: 3/8" Handle Material: Mother of Pearl Frame/Liner: Stainless Weight: 1.20 oz...

PRODUCT DESCRIPTION Mike has been making knives since 1978 and is a full time knife maker. Mike is very well known and respected for his slip joint folders.Recently started making flippers. Each knife is hand made one at a time and the attention to detail shows. Fit and finish is amazing this...

PRODUCT DESCRIPTION Howard Hitchmough, Born and raised in London, England began working in 1958 as a surgical instrument maker and during the early 1960's started making hunting knives. Also at that time, Howards fascination with mechanisms stimulated him to produce a few folding knives. Early...

PRODUCT DESCRIPTION Cory Vallotton the son of Rainy and grandson of Butch Vallotton. Corys knives show the attention to detail to be expected from such a family as the Vallottons. Overall Length: 8-3/4" Blade Length: 4" Cutting Edge: 3-1/2" Blade Material: ATS-34 Blade Style: Clip Point...

PRODUCT DESCRIPTION DOC Black DLC Bld Carbon Fiber - 5-1/2" closed framelock. 3-3/4" manual opening, hollow ground Elmax stainless blade with black stonewash DLC finish and flipper. The blade features a notched area to provide extra grip and a large finger choil for choking up on the blade...

PRODUCT DESCRIPTION Overall Length: 7-1/4" Blade Length: 3" Cutting Edge: 2-3/4" Blade Material: Rob Thomas Herringbone Damascus Blade Grind: Flat Blade Finish: Damascus Edge Type: Plain Handle Length: 4-1/4" Handle Thickness: 1/2" Handle Material: Marbled CF Bolsters: Rob Thomas...

PRODUCT DESCRIPTION Overall Length: 9-1/4" Closed Length: 5-1/4" Blade Length: 4" Blade Material: CPM-154 Blade Finish: Hand Rubbed Satin Blade Type: Sheepsfoot Knife Type: Flipper Handle Material: Titanium Lock Type: Liner Lock Weight: 6.24oz Pocket Clip: Right Hand, Tip Up Engraving: Orcas On...

PRODUCT DESCRIPTION Model: War Tags Blade Steel: 1095 Blade Length: 1-1/2" Cutting Edge: 1-3/8" Overal Length: 5-3/4" Closed Length: 2" Blade Thickness: .126" Edge: 30 Degrees/Chisel Ground Handle Material: Brass Weight: 2.93 To 3.2oz Comes in two piece box with COA We Have Different...

PRODUCT DESCRIPTION This War Pig is custom made for us by the great folks at Red Horse. It has a Chad Nichols Damascus blade and a Damascus floating back spacer with landyard hole. Overall Length: 7-3/4" Blade Length: 3" Blade Material: Stainless Damascus Hardness: 58-61 RC Blade Finish...

PRODUCT DESCRIPTION Steven Kelly framelock folder features a Chad Nichols Stainless Damascus blade with flipper and false top edge. The handle has a cocobolo and c/f, titanium frame with anodized titanium barrel spacers, and tip up c/f pocket clip. Also has anodized lockbar stabilizer and...