Search results

Gliden, You will need to either put the VFD in a grindings free room or put the VFD in an enclosure with a filtered vents and a fan to protect the VFD from the metal grindings. The VFD has a fan in it to draw cooling air inside it. Of course, this will also suck the metal grindings in and...

Not if it is in a NEMA 4X enclosure with proper cable glands. NEMA 4X enclosures are air tight and are even used in car washes.

I have a quick connect on mine. Make sure that you get the ones for fuel, not just the compressed air type. They will leak. You will not get the fine adjustments needed with either a ball valve or the adjustable vent on the blower.

Tracy have you looked at the attachments on my Forge Supplies page of my web-site? Good info there. It does not appear that you have a gate valve on your air supply for more precise control. A ball valve will not give you the control that you need. I do recommend a ball valve on the fuel...

Check out the video on the grinders page then look at the DVDs page for getting the DVD at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you.

Check out the Build a Gas Forge and the Ribbon Burner attachments on the Forge Supplies page at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you.

you will have to get the hub and disks directly from Rod. I can supply you with the 1 hp 1800rpm TEFC cast aluminum motor for $350.25. Due to the import tariffs there is an additional $20.00 added to the cost of the motors, therefore the cost now is $370.25. This will be removed if the tariffs...

Check with KB and see if you can't send it in for repair. If nothing else you would have a back up or maybe you could sell one.

I use a pid with my Ribbon Burner forge. The temp in not controlled by the PID but the forge does do well at maintaining an even heat. Fred Rowe has a PID controlled forge, last time I was there he didn't have a Ribbon Burner forge though. Check out the Build a Gas Forge and the Ribbon Burner...

Check out the video on the grinders page then look at the DVDs page for getting the DVD at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you.

Check out the video on the grinders page then look at the DVDs page for getting the DVD at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you.

I use a Press or Treadle Hammer and use the jig multiple times. Put never seize or similar product on the threads. You can actually do it cold if you had a press from what I read with these two soft materials. From what I read heating them technically this doesn’t actually forge weld them in...

You get more contrast if you alternate quarters and nickels. I press the nickels cold to about the size of the quarters I press onto a piece of D2 (plainer blade). The nickels will dent mild steel.

Have you read the Build a Gas Forge and Ribbon Burner attachments on the Forge Supplies at www.WayneCoeArtistBlacksmith.com? I do not recommend square forges or forges with fire brick linings. Let me know if I can help you.

They've lost their guns, now their losing their pointy objects. broom sticks and plungers are next. No, they've lost their minds. Still the most dangerous object is a #2 lead pencil and they are legal in first grade classes up through and including 12th grade or any place else. Well, I'm not...

Which is better Whiskey or Tequila? It depends.

See Moe's Grinder on the Grinders and DVD pages of my web-site. Let me know if I can help you. Wayne

See the video on the Grinders page of my web-site. I show how Moe's Grinder can be used in either orientation. Let me know if I can help you.

When I built my grinder with a VFD and 3 phase motor I could not believe how much quieter, smoother and how much more power I had. There is vibration, noise and transmission losses when you use the step pullies. Send me an e-mail and I can help you with your VFD, motor and wiring kit with...

Look into building your own and save a lot of money. You can probably build Moe's Grinder frame from your scrap pile. Look at the video on the Grinders page and look into the Build Moe's Grinder DVD at www.WayneCoeArtistBlacksmith.com. Let me know if I can help you. Wayne