Search results

In for Sunday. Fred

Saturday in. Fred

Merry Christmas. Wednesday for me. Fred

Tuesday in for me. Fred

In Sunday. Fred

I am in for Saturday. Fred

Stan, Glad you spotted that. I did not stay on the page long enough to take a good look. Fred

Here you have some counterbores. http://www.use-enco.com/CGI/INPDFF?PMPAGE=84&PMCTLG=00 But 1/4 requires a 3/32nd ppilot. Fred

Gahagan, I know how "things" can interfere knifemaking. Hope everything eases up, and you get back on it. Fred

Gahagan, Are you having one of those Las Vegas "weekends", two months long? I am hoping for more photos of your progress, the blade looks great! Fred

I recently got my hands on a freon tank. I will turn that into a forge. Thanks to all for your help!! Fred

Jason, I own one with a 1hp motor, 3 position pulley, the small wheel attachment, flat platen, and 8" wheel. It is still working fine. They ran about $1200+ with attachments. I picked mine up at the KM Guild show in Florida. I built a KMG clone with a 3HP motor that I use more. If I can help...

Ken H, I was quoting from the link Rudy Joly posted. I don't know enough about electricity to argue it either way. Tuesday I will ask electricians or instrument techs about this. Thanks, Fred

KEN H, I looked at the photos on USA knifemaker and could not see any external wire, that doesn't mean it isn't there. ;) Is this the information you were refering to?-If you have the choice between 110V and 220V for the power feed to the elements, 220V is the better option. The heat generated...

Roger, You might look at this-http://www.bladeforums.com/forums/showthread.php/985651-Heat-Treat-Oven-Wiring-Schematic-Future-Sticky It is for a 240 oven. Fred

Rudy Joly and KenH, thanks for the response and help. I took another look at it, the KD oven. I would have to either take it apart to get access to the TC or drill a hole for another TC connected to the PID. Either of those moves would cancel the warranty. I am torn between buying the oven or...

KenH, Thanks for answering. What do you mean by PWM? Which Evenheat did you get? Fred

If you already have a pid controller set up, is there any reason that you could not use it to control the kd 8414 oven? Plug the oven into your control box with two SSRs, one for each hot leg and pid plus thermocoule hook up, and the oven into your NEMA 6-15P 15amp 250v plug, 9 amp source...

Congratulations to JawJacker and Thank You Fred for the Give Away. Fred

Thanks for the chance. Number is 159.