Search results

i used mine for about six months for blade finishing and it worked great, but after working on some G10 (finishing the spine of the blade) it got dirty, it doesn't cut as good as it used to i'm sure that if i have only used it for blades it would last longer but i should try and clean it before...

beautiful work!

thanks guys i'm glad you like it. the blade finish is a fine scotchbrite belt that is 690 CF

blade: CPM D2, full flat ground, 2.5mm thick 5.5cm wide, 59-61HRC handle: 690 carbon fiber with G10 spacer and titanium chainring bolts overall length: 31cm kydex edge cover thanks for looking. Lee Lerman

amazing WIP, i can't wait for the next update, i love seeing how different makers have different working methods.

thanks guys. dan van, the logo is a mirrored image of my initials L.L- Lee Lerman, and the line in the middle is there just to look good :D as for making the knives identical, this is my method, nothing special http://knifedogs.com/showthread.php?34548-friction-folders-WIP-6-batch

Hello, just finished these four friction folders for the upcoming solingen knife makers show in May. blades: CPM D2, 2.5mm thick, 59-61HRC handles: carbon fiber lightning strike carbon fiber blackwood titanium all with 1.8mm thick titanium liners and titanium screws overall length:17cm...

thanks Laurence

thanks! Bruce, it's just a drop in the ocean compared to all your super detailed WIPs, but i'm glad you enjoyed it.

thanks Bruce, i didn't do the stone setting myself on this one, a friend did it and he did an amazing job, but i did learn alot from the process, about the oak, i think Mark explained it well :) and Mark, thanks for the correction, a thousand years give or take :D

here is a link to the pics of the finished knife: http://knifedogs.com/showthread.php?36359-Damascus-Libratum

blade: L6 and 1080 damascus, 5mm thick handle: 5460 years old stabilized bog oak bolster: 925 silver with black zirconia stones setting overall length: 25cm damascus by Rudi Zirlin Custom Knives stone setting by Oleg Leybman here is a link to WIP...

thanks! that will pay for half the shipping for my next order :D

thanks Brian, that's what i'm trying to do, i undarstand that if the ball drops down all the way it's not forcing the blade against the stop pin hence not doing its job. i dye the blade with dykem and let the ball mark it's path in it and here is my problem: i try drilling the hole 0.1mm from...

hello, i'm in the process of installing detent balls on my friction folders, both for open and closed position, i milled a small spring bar into one of the liners and set a 1.5mm ball in it, so far so good, but in all my tests i can't seem to get the positin of the holes the blade in the right...

waw, that is so nice of you to offer Brian, that would be a great! prices sound right, i'm used to sipping prices like that here, i'v sent you a PM, thanks again for the really generous gesture.

Hello guys, i wanted a tapmatic for a long time now and finally got one in a trade with a friend, problem is that he didn't have the collets for it, i can't find any on ebay, enco has two sizes made by jacobs but they don't ship to israel :( , does anyone know where i can find them...

i'll start with saying that i never thought i would ever do a knife with stone setting in it, it's just not my thing, but i do like to take the occasional design challenge by steping out of my comfort zone, this was definitely one of those occasions, the bolster was sent to a stone setter...

thanks Doug

ok, i got the casting back so work can resume. heat treatment this is the silver as it came back from the foundry after some cleaning and milling some awsome stabilized bog oak from mark making the holes for the alignment pins temporary alignment pins to...