Search results

Those both are are some dark an blued beauties. As always the angled plunges have me a lil envious.

Wayne has alot of great info on his page about how to and sells the supplies to build the forge also. An old freon bottle can be gotten for little cash. An angle grinder and a cut off wheel can open it up and make a perfect set of doors. Research a little and you will find alot of info on...

Oh I left out the tragicly funny part, I had the 3 pins staged in the other scale to set them all in line an push through. Buuut I dropped the scale and lost 2 pins on the bench,floor or my chair. Stand up to look for them and find two then quickly used one to measure a 3rd an cut it. It was a...

Im in for this years gift exchange. Despite using wood most the time G10 would be a new one to try. Lol

The overall look aside from a smidgeon too short is great man. I have discovered if my hand feels a bit cramped in the handle its gonna still be small with a handle on it. If I feel its too narrow beteen palm and fingers, but long enough there is no cramped feeling it will be about a glove like...

Ok, seriously the other 3 you made were flawed so bad you wouldnt use them? Were the flaws cosmetic or fit/ mechanical? Cosmetic can be fixed with hand sanding mechanical or fit, not so much. The two lil blems next to the notch can be cleaned up with and sanding if you wanted. On the closed...

Welcome Im just up the freeway in Roseburg.

Not to self, make sure the holes are drilled through the felt liner before glue up. Ghaaaaaaaaa!!!!!!!!!!!! Gelling epoxy hopefully becomes a solid clean bond. If not I have a date with a heat gun to remove it all and start over. Dhoht!!!!!

Thanks Andrew. Im trying.

Its where the edge of the belt " dips " into the blade. It happens when you have one edge of the belt off square when making a pass while grinding.

Thanks Im about 30 min away from wrapping it in blue tape and starting on the handle an liners.

Baaaaaah its when you start sanding it flat on the disk that it smells reallly good.

This is after 15 min of rubbin to clear the looooonnnnnnnng ugly line I left. Got it done after 35 min total counting shop gnome interruptions. Lol it wasnt too bad. However I may have gone a lil too far on the other side. 600 flat and 1500 bevel

Depending on how your planning on using the shed the whole thing can be used as a handle for full tangs, hidden tangs and even go as far as to use the long skinny ones to hold a fire steel and pair it with the knife handle that it was cut from. However you use it DO NOT TRY TO DRIVE THE ANTLER...

Using a bandsaw and taking your time it is fairly easy.

Aaaaaahhhhhh some day I may learn not to leave the center of the blade on the belt.

I dunno about the waterglass question but using chicago screws would make the scales removable. Am unsure as to why one would want to remove scales unless as a display item.

Hahahahaaaa oh yeah he does. He has over torqued a vise and broke a planer blade blank,bolts and screws around the house as well. New drill press is making the gorilla be a trained monkey and be more gentle with things. Lol

I have been fortunate so far, (knocking on work bench) there was the one warp cause the gorilla drilled the hole aggresively with a hand drill and a vice. Is gonna be a lil bot before I buy more steel, mommas washer died sunday and we used the extra we had to replace it today. So I wait and...

So is unanimus the logic of grinding post ht and keep it cool.