Search results

So I am in the process of converting my surface grinder to run belts. I have been in contact with a few contact wheel companies looking for quotes. I talked to Stephen Bader this morning and mentioned that it would be unsafe to run a 1in wide belt on a 2in wide contact wheel. He mentioned that...

I use 1-72, I think that the smaller screws just look better. You also get more TPI with a smaller screw. I also use a tapmatic with thread forming taps.

This one is sold!

This one is sold!

Try boiling it, no messy burning epoxy smell.

Randy, You can use a Static Phase Converter - Horsepower: 3-5 http://www.use-enco.com/CGI/INSRIT?PMAKA=297-3540&PMPXNO=952399&PARTPG=INLMK3

This is balisong #46. The blade is 3-7/8in long to the first tang pin, made of 1095 with hamon. The bevels are hollow ground and polished up to 1500 grit for more of a traditional polish. The handles are copper/niobium superconductor. The spacers are damascus and the latch is copper from the...

This one is Sold pending funds.

I had a little day surgery on Friday but finally felt well enough to finish up this little knife, it has great lines. The blade is 2-3/4in long to the top of the handles and is made out of 1/8in thick 1095 with hamon. The scales are fossil walrus ivory and are attached with torx screws that I...

It could be a couple of things. Do you have too much bend in your lock? This would put more pressure on the lock and have it "bite". Do you have too much of the lock face engaging on the blade tang? Is the blade tang flush with the outside edge of the liners or is it inset? This would cause...

The blade is 4-7/8in long, 1-1/16in wide and is made of CPM154. The scales are black carbon fiber and the overall length is 8-7/8in. The blade has been acid etched and the blade bevels are satin finished. Comes with a gray kydex sheath which can be worn on your belt with the loops swung up. If...

This one is sold pending funds.

Up for sale is a small fixed blade with hamon. The blade is 1-3/4in long, 1/8in thick and made of W-1 with a hamon. The scales are snake wood and are attached with torx screws. The overall length is 3-13/16. Comes with a simple brown leather sheath. Price is $135 shipped, insured ect. Thanks...

This is a start if you want a mill. It's on the Houston Craigs list. http://houston.craigslist.org/bfs/2238658471.html

What about a mailing tube?

Don't waste your money on the HF mini mill/drill machine. It is not heavy enough or rigid enough to slot guards or recess liners. You can do little work on an big machine, you can't do big work on a little machine. Upgrade your grinder, it will eventually pay for itself.

This one is Sold pending funds.

Up for sale is an extra small snubnose framelock. This one has my Sharkbite opening method. The blade is 1/8in thick, 2-1/8 in long and made of D-2. The main bevel is hollow ground and the false edge is flat ground. The scales and clip are titanium that I heat colored with my own process to...

This is Balisong #45 with a scimitar blade pattern. The blade is 4in long and made of Al May multi-bar twist damascus. The main bevel is hollow ground and the false edge is flat ground. The handles are titanium with a textured/orange peel finish and the inserts are black G-10. I also...

This is Balisong #45 with a scimitar blade pattern. The blade is 4in long and made of Al May multi-bar twist damascus. The main bevel is hollow ground and the false edge is flat ground. The handles are titanium with a textured/orange peel finish and the inserts are black G-10. I also...