Recent content by J. Hoover

Yes it helps fill the hand and while it looks aggressive I have rounded all the edges so it doesn't dig into your hand. Thanks for asking, Joe

@@SOLD@@ https://youtu.be/c8-i8oOiX_Q Open 7inches Closed- 3 7/8 inches Blade- 3 1/8 inches Steel- AEB-L stainless Grind- Flat ground with clip HT- In House with dry ice cryo to 59-60rc Finish- Satin hand sanded finish Frame- .155 titanium frame with media blasted finish Back Spacer- Anodized...

SOLD Closed- 4 inches Open- 7 inches Blade- 3 inches Steel- Stainless Damasteel Damascus Liners- Pebbled anodized Titanium Bolsters- 3m Composite metal Scales- Mammoth Ivory Back Spacer- Kirinite Hardware- Gold plated Caged Bearings Solid no movement early lock up is silky smooth on...

@@SOLD@@ Closed- approx. 4 inches Open- approx. 6 7/8 inches Blade- just over 2 7/8 inches Steel- cpm s35vn x .160 Grind- Flat with drawn swedge Finish- stonewashed Frame- Stonewashed titanium Bolster- Titanium Scale- Methyl Blue Carbonfiber Clip- Titanium set up for RH tip up carry Back...

Medium size ti flipper I recently finished. Action is fast on caged bearings, light and rides in my pocket great.

SOLD Steel- cpm s35vn x .140 Closed- 4 1/4 inches Open- 7 1/2 inches Blade- 3 1/4 inches Grind- Flat Frame- 6AL4V .130 titanium Backspacer- Titanium Clip- Titanium RH low ride tip up carry Weight- 4.1 oz. Flips hard and fast on bearing pivot. Lock up is absolutely rock solid with no movement...

No longer available Closed- 3 5/8 inches Open- 6 3/8 inches Blade- AEB-L Stainless with stonewashed matte finish with ghost stripes Grind- Flat Frame- Anodized titanium Bolsters- M3 Composite metal Scales- Stabilized Sycamore (Spalted Snakeskin) Thumb Stud- Custom hand made anodized titanium...

No longer available Closed- 4 1/8 inches Open- 7 1/8 inches Steel- Damasteel Hugin pattern damascus .156 thick Grind- Flat ground to a thin edge with heavy etch Frame- Bronze anodized and file worked titanium Bolsters- 3m Composite Metal damascus pattern Scales- Mammoth Ivory Thumb bob- Custom...

Thanks Wayne, I appreciate the kind words.

SOLD Closed- 4 1/8th inches Open- 7 1/8 inches Blade- 3 inches Steel- Aldo's San Mia Grind- Flat Liners- Titanium Scales- Turtle Shell Kirinite Back Spacer- Black/Gold Kirinite Caged bearings for a fast smooth movement, secure lock up with no movement, nice detent. Asking SOLD shipped in the...

Tanto Battle Blade @@SOLD@@ SOLD Steel- 52100 x .270 AOL- 9 1/2 inches Blade- 4 1/2 inches Grind- Compound flat ground blade with skull crusher and lanyard hole Blade Finish- Cold blue finish and is easily re-touched with Birchwood Casey Super Blue Scales- Contoured Rosewood Cocobolo...

One I just finished, built to take abuse on the trail. 14 inches overall with a 8 inch sharpened edge. Aldo's 5160 .275 thick with carved spine and machine finish on flat ground bevels. Black canvas micarta with red spacer, and stainless pins.

Thanks everyone, I appreciate the knid words.

This one is no longer available, thanks for looking and commenting. Closed-4 1/4 inches Open- 7 3/4 inches Steel- cpm D2 at 60-61rc Blade- 3 1/8 inches Grind- Flat Finish- Tumbled acid washed Frame- 6Al4V Titanium Finish- Carved and anodized blue (primary) with bronze highlights Bolsters-...

Thanks guys, I had to look up the specs in my log. Liners are .070 ti and back spacer was .196 ti. Blade steel is .156 cpm154 .