ChrisW2374's latest activity

I made and ulu for FB group competition and had to start over due to a crack in the blade. So I made a stock removal as a back while...

My son had asked about me making a knife and how much it would cost. I told him to come out and make it and it wouldn't cost him...

Cool design. On the next one, I'd try adding a primary bevel to thin the edge out even more, or even just taking your edge up a bit...

Gentlemen, I tried the vaseline trick using bag balm as it's what we had on hand it worked great thanks for the tip.

I did have some trouble with some fishmouthing especially on the tang. The only hammer i have is a cross peen my anvil is not in the...

I'm better at forging than I am at knife making. Got any pictures of the UNFINISHED knife? Are you having any trouble during the...

No it's not grinder free I just mean forged it to the basic shape. My skills aren't good enough to do anything grinder free.

Oh it was meant to be grinder free work? Doh, well in that case if it's entirely hand forged then, yeah that's bloody brill.

Thanks Doug!

Thank you for the video links

Thank you SM I do have a drill press but still had some issues with alignment of my pins. As for all the other advice thank you i...

Just anything you see i could maybe do better next time.

Whatcha wanna know? Got any questions about forging? Sent from my Champion Forge using Tapatalk

Nice looking ulu! For the glue issue... I've had decent luck by temporarily locating the scales to the blade, then using a Q-Tip with...

My twin brother lives in Alaska and asked for an ulu with a handle. Here it is, it's stock removal as I don't feel i can forge this...