JD Brown
KNIFE MAKER
Hey guys , starting a new slipjoint this morning ! This is a Chris Crawford design so all credit goes to him, it’s a great little everyday knife . I’m going to be using PG 01 tool steel, .040 nickel silver liners , 5/32 nickel silver bolsters (that will be worked down a lot thinner) and some pretty 50 year old stag I robbed off an old table carving knife set . I intend to post pics of the process , not every step but hopefully enough you can walk through the build with me !
First few pictures are of all the parts except the bolsters roughed out , ready to start fitting !!![IMG_3798.jpeg IMG_3798.jpeg](https://knifedogs.com/data/attachments/65/65072-6c1aadb3970ff73fa5af201f70fc99b4.jpg)
![IMG_3799.jpeg IMG_3799.jpeg](https://knifedogs.com/data/attachments/65/65071-fad7d3148e2bc2c51d6464f9ed266a4d.jpg)
First few pictures are of all the parts except the bolsters roughed out , ready to start fitting !!
![IMG_3798.jpeg IMG_3798.jpeg](https://knifedogs.com/data/attachments/65/65072-6c1aadb3970ff73fa5af201f70fc99b4.jpg)
![IMG_3799.jpeg IMG_3799.jpeg](https://knifedogs.com/data/attachments/65/65071-fad7d3148e2bc2c51d6464f9ed266a4d.jpg)