Calvin Robinson
Moderator Christian Forum
Put on your sunglasses before viewing these photos of this custom made orange slipjoint.
This is my Big Trapper model slipjoint folder.The customer wanted orange so I am happy to oblige. This knife is 4 3/16" closed with a 3 1/4" blade. I made the blade from .095" Sandvik 14C28N,I used the same steel for the spring. This blade has semitrical cut swedges and is flat ground to the spine. The integral bolster/liners are 410 stainless steel,all pins are 410 stainless and I made washers for anti scratch relief from stainless shimstock. The scales are G-10 and the shield is pinned. This knife weighs 3.2 oz
All comments and questions are welcome.
Y'all enjoy!:biggrin:
This is my Big Trapper model slipjoint folder.The customer wanted orange so I am happy to oblige. This knife is 4 3/16" closed with a 3 1/4" blade. I made the blade from .095" Sandvik 14C28N,I used the same steel for the spring. This blade has semitrical cut swedges and is flat ground to the spine. The integral bolster/liners are 410 stainless steel,all pins are 410 stainless and I made washers for anti scratch relief from stainless shimstock. The scales are G-10 and the shield is pinned. This knife weighs 3.2 oz
All comments and questions are welcome.
Y'all enjoy!:biggrin: